Literature cited
V. K. Lazarev, V. G. Krasov, and I. S. Shaplygen, The Electrical Conductivity of Oxide Systems and Film Structures [in Russian], Nauka, Moscow (1979).
A. Laurie, “A high quality base metal, thick film resistor system,” in: IEEE: 23rd Electrical Components Conference (Washington, 12–13 May 1973), Washington (1973), pp. 137–139.
E. K. Browne and B. Walton, “An air firing base metal resistor and conductor system for low cost thick film circuit manufacture,” Electrocomp. Sci. and Tech.,8, No. 1/2, 61–65 (1981).
L. M. Plyasova and L. G. Karakchiev, “A study of cobalt molybdate,” Neorg. Mater.,8, No. 1, 117–122 (1972).
V. G. Grebenkina, A. Ya. Pazhin, and L. G. Panov, “A conductor paste based on nickel borides for thin-film BRPA microassemblies,” in: The Technology of Communications. Technology, Production, and Equipment Series [in Russian], No. 2 (1983), pp. 43–48.
G. Pike and C. Seager, “Electrical properties and conduction mechanisms of Ru-based thick film (cermet) resistors,” J. Appl. Phys.,48, No. 12, 5152–5169 (1977).
N. Mott and E. Davis, Electronic Processes in Noncrystalline Substances: in Two Volumes [Russian translation], Mir, Moscow (1982).
K. Kao and V. Huant, Transfer of Electrons in Solids [Russian translation], Mir, Moscow (1984).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 6(318), pp. 62–65, June, 1989.
Rights and permissions
About this article
Cite this article
Brizitskii, V.M., Grebenkina, V.G., Dyshel', D.E. et al. Electrical properties of cobalt molybdate-base composites. Powder Metall Met Ceram 28, 472–475 (1989). https://doi.org/10.1007/BF00795304
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00795304