Literature cited
I. D. Radomysel'skii and E. L. Pechentkovskii, “Effect of pressing tool design on density distribution in bushing-type sintered parts,” Poroshk. Metall., No. 4, 13–19 (1970).
I. D. Radomysel'skii et al., “Effect of mode of pressing on the stressed—strained state of bushing-type parts (Part I),” Poroshk. Metall., No. 3, 1–7 (1978).
I. D. Radomysel'skii et al., “Effect of mode of pressing on the stressed—strained state of bushing-type parts (Part II),” Poroshk. Metall., No. 4, 15–20 (1978).
I. D. Radomysel'skii, E. L. Pechentkovskii, and G. G. Serdyuk, Pressing Tools for Powder Metallurgy: Calculation and Design [in Russian], Tekhnika, Kiev (1970).
I. D. Radornysel'skii, G. G. Serdyuk, and Yu. I. Kovalev, “Determination of the lateral pressure coefficient in the compaction of iron powders,” Poroshk. Metall., No. 9, 6–10 (1966).
M. Yu. Bal'shin, Powder Metal Science [in Russian], Mashgiz, Moscow (1948).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(185), pp. 12–17, May, 1978.
Rights and permissions
About this article
Cite this article
Shtern, M.B., Pechentkovskii, E.L., Radomysel'skii, I.D. et al. Effect of mode of pressing on the stressed-strained state of bushing-type parts. Powder Metall Met Ceram 17, 343–347 (1978). https://doi.org/10.1007/BF00795013
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00795013