Literature cited
A. I. Raichenko, Fundamentals of the Process of Sintering Powders by the Passage of Electric Current [in Russian] Metallurgiya, Moscow (1987).
I. Kiesi, A Press Mold for Sintering Using Electric Current, Patent No. 14645, Japan, Published 25.05.70.
I. Kiesi, Electric Sintering Method, Patent No. 12491, Japan, Published 27.05.68.
I. Kiesi, A Press Mold Used for Electric Discharge Sintering, Patent No. 25805, Japan, Published 18.04.68.
V. V. Malinovskii, A. A. Baidenko, V. P. Popov, and A. V. Svechkov, “Materials of press molds for electric discharge sintering powder compositions based on Cu-Sn, Cu-Zn,” Perodovoi Opyt, No. 1, 31 (1989).
N. Z. Pozdnyak and A. N. Krushinskii, Design and Equipment in Powder Metallurgy Shops [in Russian], Mashinostroenie, Moscow (1965).
L. I. Klyachko, A. M. Umanskii, and V. N. Bobrov, Equipment and Jigging for Shaping Powder Materials [in Russian], Metallurgiya, Moscow (1986).
S. A. Kiparisov and L. V. Padalko, Equipment in Powder Metallurgy Plant [in Russian], Metallurgiya, Moscow (1988).
I. Kiesi, A Mold for Electric Discharge Sintering, Patent No. 21533, Japan, Published 13.09.69.
I. Kiesi, Equipment for Electric Discharge Sintering, Patent No. 12368, Japan, Published 06.05.70.
I. Kiesi, A Method and Device for Electric Discharge Sintering, Patent No. 1685, Japan, Published 16.01.71.
T. I. Istomina, A. A. Baidenko, A. I. Raichenko, et al., “Effect of pressing pressure in electric discharge on the physical-mechanical properties of the copper-tin-abrasive composition,” Poroshk. Metall., No. 11, 99–102 (1983).
V. N. Bakul', Yu. I. Nikitin, E. B. Vernik, and V. F. Selekh, The Fundamentals of Design and Technology of Production of Abrasive and Diamond Tools [in Russian], Mashinostroenie, Moscow (1975).
I. Kiesi, A Press Mold Used for Electric Discharge Sintering, Patent No. 25805, Japan, Published 18.04.68.
I. Kiesi, A Press Mold for Electric Discharge Sintering, Patent No. 32329, Japan, Published 19.10.70.
I. Kiesi, A Punch for Electric Discharge Sintering, Patent No. 5927, Japan, Published 15.02.71.
A. I. Raichenko, I. M. Fedorchenko, G. G. Karyuk, et al., “Equipment for electric discharge sintering of components of metallic powders,” Inventor's Certificate No. 565776, USSR, Otkr. Izobret., No. 27, 35 (1977).
A. A. Baidenko, Yu. P. Vertebnyi, A. I. Raichenko, et al., “A press mold for pressing powders,” Inventor's Certificate No. 1227335, USSR, Otkr. Izobret., No. 16, 47 (1986).
G. V. Samsonov and S. Ya. Plotkin, Production of Iron Powders [in Russian], Metallurgizdat, Moscow (1957).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 11 (347), pp. 78–82, November, 1991.
Rights and permissions
About this article
Cite this article
Svechkov, A.V., Baidenko, A.A., Popov, V.P. et al. Design of press molds for electric discharge sintering diamond tools from powder compositions based on Cu-Sn. Powder Metall Met Ceram 30, 969–972 (1991). https://doi.org/10.1007/BF00794603
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00794603