Literature cited
V. I. Tret'yakov, L. I. Klyachko, and G. G. Kupranova, “Tungstenless hard alloys,” Tsvetnye Met., No. 11, 89–91 (1979).
V. I. Tret'yakov and V. S. Samoilov, “Tungstenless hard alloys and fields of their application,” Nauchnye Trudy VNIITS, No. 22, 5–9 (1981).
E. D. Doron'kin, “New tool materials without tungsten or cobalt,” Tsvetnye Met., No. 9, 16–17 (1982).
R. Kieffer, P. Ettmayer, and M. Freudhofmeier, “Uber neuartige Nitrid und Karbonitrid Hartmetalle,” Metall.,25, 1335–1339 (1971).
I. I. Bilyk, “Prospects of the use of carbonitrides as the hard component of cermet hard alloys,” Poroshk. Metall., No. 6, 49–54 (1972).
G. P. Shveikin, V. D. Lyubimov, and B. V. Mitrofanov, Inventors' certificate 609338 USSR. Hard Alloy Based on Titanium Carbonitride. Otkrytiya. Izobret., No. 40, 298 (1980).
G. P. Shveikin, V. D. Lyubimov, B. V. Mitrofanov, et al., Inventors' certificate 509086 USSR. Hard Alloy Based on a High Melting Titanium Compound. Otkrytiya. Izobret., No. 37, 208 (1977).
G. P. Shveikin, V. D. Lyubimov, B. V. Mitrofanov, and D. S. Élinson, The Physicomechanical Properties of land Some Recommendations for the Use of Tungstenless Hard Alloys Type KNT16 in the Metal Processing Industry [in Russian], Information Sheet No. 379-77, TsNTI, Sverdlovsk (1977).
D. S. Élinson, G. P. Shveikin, V. D. Lyubimov et al., Application of the Tungstenless Hard Alloy Marque LTsK20 [in Russian], Information Sheet No. 86-53, TsNTI, Sverdlovsk (1977).
H. Suzuki, K. Hayashi, and H. Mattsubara, “Nikhon kingzoku rakkai Koikho,” Bull. Jpn. Inst. Metals,22, No. 4, 312–319 (1983).
H. Doi, Advanced TiC and TiC-TiN base cermets — science of hard materials, in: Proceedings of the International Conference on the Science of Hard Materials Held in Bhodes (22-28 Sept., 1984).
R. Kieffer and P. Ettmayer, “Recent advances in the knowledge and applications of transition metal nitrides,” High Temperatures-High Pressures,6, 253–260 (1974).
H. Suzuki, K. Hayashi, and Y. Kubo, “Fyntau oebi fymmuzu ekun,” J. Jpn. Soc. Powder and Powder Met.,27, No. 8, 266–270 (1980).
K. Uehara and Y. Kanda, “Fundamental approach to the thermal crack of cermet cutting tools,” C. J. R. P. Ann.,30, No. 1, 47–57 (1981).
T. Nishimura, H. Yoshino, Y. Matsumoto, and S. Imasato, “The behavior of carbon, oxygen and nitrogen in cemented carbide,” Nippon Tungsten Rev.,15, 16–20 (1982).
H. Ito, M. Taraka, and K. Taguchi, “Nitriding on the TiC base cermet cutting tool,” Nippon Tungsten Rev.,6, 29–39 (1973).
O. Ishibashi, T. Kitada, and T. Nishimura, “Key properties of TiC-TiN base cermets,” Nippon Tungsten Rev.,9, 30–34 (1976).
O. Rudiger, “Stand und Entwicklungstendenzen auf dem Hardmetallgebiet,” Techn. Mitt.,70, No. 10–11, 599–605 (1977).
H. Suzuki, K. Hayashi, and T. Yamamoto, “High-temperature transverse bending strength of TiC base cermets,” Quoted from: J. Jpn. Soc. Powder Powder Met.,25, No. 4, 136–140 (1978).
K. Nishigaki, H. Doi, T. Chinguoji, and Y. Oozawa, “Effect of the ratio of concentrations of N and C+N in alloys TiCN-30% Mo2C-13% Ni on some properties of these alloys,” Quoted from: J. Jpn. Soc. Powder and Powder Met.,27, No. 5, 160–165 (1980).
M. Fukuhara and H. Mitani, “Effect of nitrogen content on grain growth in Ti (C, N)-Ni-Mo sintered alloy,” Powder Met. Int.,4, 196–200 (1982).
M. Fukuhara and H. Mitani, “Mechanisms of grain growth in Ti (C, N)-Ni sintered alloys,” Powder Met.,25, No. 2, 62–68 (1982).
G. T. Dzodziev, A. A. Kal'kov, A. A. Dubrovskii et al., “New marques of tungstenless hard alloys TiC-Ni-Mo for milling cast iron and steels,” Poroshk. Metall., No. 4, 87–90 (1983).
H. Suzuki and H. Matsubara, “Some properties of sintered specimens of Ti (C, N)-Mo2C,” Quoted from: J. Jpn. Soc. Powder and Powder Met.,30, No. 7, 257–262 (1983).
H. Suzuki, H. Matsubara, and T. Saiton, “Effect of the microstructure of defects on the strength of the alloy TiC0.5N0.5-Mo2C-Ni,” Quoted from: J. Jpn. Inst. Met.,48, No. 10, 1011–1016 (1984).
R. Sivan, R. Porat, Y. Landau, and H. Leibenberg, “New titanium carbide grades for metal cutting. Special steels and hard materials,” in: Proc. Int. Conf. Recent Dev. Spec. Steels and Hard Mater. (Pretoria, 8–12 Nov., 1982), Oxford (1983), pp. 395–400.
I. Osamu, M. Kiyohito, N. Tomio, and M. Hirotoshi, “The effect of niobium carbide to titanium carbide base cermets,” Nippon Tungsten Rev.,6, 74–79 (1973).
G. V. Samsonov, V. K. Vitryanyuk, M. A. Voronin, and G. K. Lamakin, “Effect of niobium carbide on the properties of tungstenless hard alloys,” Poroshk. Metall., No. 9, 85–87 (1973).
H. Suzuki, K. Hayashi, and Y. Kubo, “The effect of additions of ZrC on the high-temperature strength of the cermet TiC-Mo2C-Ni,” Quoted from: J. Jpn. Soc. Powder and Powder Met., 27, No. 3, 77–81 (1980).
H. Suzuki, K. Hayashi, and I. Osamu, “Funtai oevi fummatsu yakin,” Quoted from: J. Jpn. Soc. Powder Powder Met.,25, No. 4, 132–135 (1978).
T. Kavai, N. Takahasi, and K. Hitati, Patent Application 57-169059 (Japan). Published October 18, 1982.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 11 (347), pp. 65–71, November, 1991.
Rights and permissions
About this article
Cite this article
Lyubimov, V.D., Élinson, D.S. & Shveikin, G.P. Optimization of the operational properties of tungstenless hard alloys. Powder Metall Met Ceram 30, 957–963 (1991). https://doi.org/10.1007/BF00794601
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00794601