Literature cited
B. Ya. Pines and N. I. Sukhinin, “Some aspects of mechanical strength in solid materials produced by sintering iron powders,” Zh. Tekh. Fiz.,26, No. 9, 2976–2985 (1956).
A. Ya. Krasovskii, “An investigation into the deformation and fracture behavior of porous sintered materials based on ductile metals under the action of static and cyclic loads,” Author's Abstract of Candidate's Dissertation, Kiev (1964).
V. V. Dudukalenko and A. Yu. Smyslov, “Calculation of the plasticity limits of porous materials,” Prikl. Mekh.,46, No. 5, 32–36 (1980).
“Iron powder,” GOST 9849-74, Jan. 10, 1974.
V. V. Panasyuk, A. E. Andreikiv, and S. E. Kovchik, “Experimental determination of the fracture toughness of constructional materials,” Fiz.-Khim. Mekh. Mater.,12, No. 2, 10–17 (1976).
J. L. Chermant, “Determination of fracture toughness for brittle materials,” Bull. Soc. Franc. Ceram., No. 108, 39–52 (1975).
Ya. E. Geguzin, The Physics of Sintering [in Russian], Nauka, Moscow (1967).
G. N. Savin, Distribution of Stresses around Holes [in Russian], Naukova Dumka, Kiev (1968).
L. A. Fil'shtinskii, “Stresses and displacements in an elastic plane weakened by a double-periodic system of identical round holes,” Prikl. Mat. Mekh.,28, No. 3 430–441 (1964).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 12(240), pp. 80–84, December, 1982.
Rights and permissions
About this article
Cite this article
Drachinskii, A.S., Kushchevskii, A.E., Perepelkin, A.V. et al. Effect of porosity on the resistance of P/M iron to cracking. Powder Metall Met Ceram 21, 973–977 (1982). https://doi.org/10.1007/BF00794343
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00794343