Literature cited
A. K. Petrov, G. I. Parabina, and A. N. Osadchii, “Structural special features and properties of high-speed tool steels produced by powder metallurgy,” Stal', 76–78 (1981).
G. G. Mukhin and L. P. Korotkova, “Nature of high hardness of atomized high-speed steels,” Metalloved. Term. Obrab. Met., No. 10, 8–11 (1982).
H. F. Fishmeister, A. D. Ozerskii, and L. Olsson, “Solidification structure of gas-atomized high-speed steel powder,” Powder Met.,25, No. 1, 1–9 (1982).
V. I. Trefilov, L. D. Kulak, and V. F. Moiseev, “Effect of the structure on the heat resistance of R6M5 and R6M5K5 high-speed tool steels,” Stal', No. 3, 89–92 (1986).
Yu. M. Skrynchenko, K. Yu. Sokol'chuk, T. N. Zvegintseva, et al.,“Effect of alloying on the structure of the powder of high-speed tool steels,” in: Problems of Examining the Structure of Amorphous Metallic Alloys, Proceedings of 3rd All-Union Conference (Zvenigorod, April 18–22, 1988), Vol. 2, Moscow Institute of Steel and Alloys, Moscow (1988).
Yu. M. Skrynchenko, K. Yu. Sokol'chuk, and V. I. Demchenko, “A method of determining the resistance to low plastic strains of high-speed steels at elevated temperatures,” Zavod. Lab., No. 3, 76–78 (1987).
K. Yu. Sokol'chuk, Yu. M. Skrynchenko, and M. R. Orlov, “Fracture toughness and strength of powder high-speed tool steels,” Metalloved. Term. Obrab. Met., No. 1, 29–32 (1988).
Yu. M. Skrynchenko, A. K. Petrov, G. I. Parabina, et al., “Main properties and efficiency of powder high-speed steels,” in: New Grades of Tool and Bearing Steels [in Russian], Metallurgiya, Moscow (1986), pp. 4–12.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 12(324), pp. 37–41, December, 1989.
Rights and permissions
About this article
Cite this article
Skrynchenko, Y.M., Sokol'chuk, K.Y., Zvegintseva, T.N. et al. Effect of the fraction composition of the powder on the properties and structure of a high-speed tool steel. Powder Metall Met Ceram 28, 940–943 (1989). https://doi.org/10.1007/BF00793878
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00793878