Conclusions
The damping properties of the TiC-TiNi alloys may be characterized by the attenuation factor of ultrasound in the megahertz frequency range. The TiNi binding phase in the hard alloy based on TiC should have a high damping effect. The addition of small amounts of boron results in the formation of a purer and denser material. We believe that the increase of the attenuation factor with the boron addition increasing to 2% is associated with the increase of the porosity of the material and not with its damping capacity.
Similar content being viewed by others
Literature cited
A. Bergman, Ultrasound and Its Application in Science and Technology [Russian translation], IL, Moscow (1957).
N. A. Krylov, Electron-Acoustic and Radiometric Methods of Testing Materials and Structure [in Russian], Gosstroiizdat, Leningrad-Moscow (1963).
H. Kolsky, Stress Waves in Solids [Russian translation], IL, Moscow (1955).
K. I. Portnoi, S. E. Salibekov, I. A. Svetlov, and V. M. Chubarov, Structure and Properties of Composite Materials [in Russian], Mashinostroenie, Moscow (1979).
V. A. Latyshenko, Diagnostics of Stiffness and Strength of Material [in Russian], Zinatne, Riga (1968).
E. G. Tarashchanskii and I. I. Vil'msen, “Examination of the elastoviscous properties of asphalt concrete by the pulsed ultrasonic method in a wide range of service temperatures,” Izv. Vyssh. Uchbn. Zaved., Stroit. Arkh., No. 7, 20–25 (1974).
I. A. Spintsis, “An ultrasonic pulsed device for determining the duration of passage and degree of attenuation of the ultrasonic pulse in concretes (IM),” in: Investigations into Concrete and Reinforced Concrete [in Russian], Izd. Akad. Nauk Latv. SSR, Riga (1960), pp. 119–126.
Yu. Kh. Favstov, Yu. N. Shul'ga, and A. G. Rakhshtadt, Physical Metallurgy of High-Damping Alloys [in Russian], Metallurgiya, Moscow (1980).
V. E. Panin, V. V. Akimov, A. Yu. Chukhlomin, and S. N. Kul'kov, “Effect of boron additions on the phase composition of alloys,” in: Proceedings of the Conference on Powder Metallurgy and Its Application Methods [in Russian], Penza (1982), pp. 19–20.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 7 (283), pp. 83–86, July, 1986.
Rights and permissions
About this article
Cite this article
Akimov, V.V., Vil'msen, I.I., Panin, V.E. et al. Determination of the inelastic properties of TiC-TiNi hard alloys by the ultrasonic pulsed method. Powder Metall Met Ceram 25, 602–604 (1986). https://doi.org/10.1007/BF00792372
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00792372