Literature cited
V. Meringolo, L. Silvaggi, and G. Mogul, “Effect of plasma-deposited coatings on the fatigue properties of steel and aluminum,” in: Production of Coatings by High-Temperature Spray Deposition [Russian translation], Atomizdat, Moscow (1973), pp. 232–239.
V. S. Klimenko, V. G. Skadin, S. Yu. Sharivker, et al., “Experimental determination of dynamic characteristics of the two-phase stream in detonation spray deposition,” Fiz. Khim. Obrab. Mater., No. 3, 133–141 (1978).
E. A. Astakhov, A. P. Garda, et al., “The heating up of powder during detonation spray deposition,” Poroshk. Metall., No. 7, 38–42 (1974).
E. A. Astakhov, A. N. Krasnov, S. Yu. Sharivker, et al., “On the formation of detonation coatings,” in: Protective High-Temperature Coatings [in Russian], Nauka, Leningrad (1972), pp. 96–100.
S. Yu. Sharivker, E. A. Astakhov, and A. P. Garda, “Effect of flight velocity of particles being sprayed on the adhesion of spray-deposited coatings,” Fiz. Khim. Obrab. Mater., No. 5, 157–158 (1974).
G. V. Samsonov, S. Yu. Sharivker, et al., “Some characteristic features of the detonation deposition of coatings,” in: Inorganic and Organosilicate Coatings [in Russian], Nauka, Leningrad (1975), pp. 80–86.
B. A. Lyashenko, V. V. Rishin, et al., “Strength of adhesion of detonation-deposited coatings,” Probl. Prochn., No. 3, 35–38 (1972).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(197), pp. 48–50, May, 1979.
Rights and permissions
About this article
Cite this article
Klimenko, V.S., Skadin, V.G., Astakhov, E.A. et al. Programmed detonation spray deposition of coatings. Powder Metall Met Ceram 18, 320–321 (1979). https://doi.org/10.1007/BF00791993
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00791993