Conclusions
-
1.
The lower the process temperature, the more pronounced is the effect of the starting specific surface of tungsten trioxide on its reduction rate.
-
2.
At approximately equal rates of low-temperature reduction of tungsten trioxide the specific surface of the metallic end product is not strongly affected by the starting specific surface of the trioxide and its reduction temperature.
Similar content being viewed by others
Literature cited
B. Delmont, Kinetics of Heterogeneous Reactions [Russian translation], Mir, Moscow (1972).
A. N. Zelikman and G. A. Meerson, Metallurgy of Rare Metals [in Russian], Metallurgiya, Moscow (1973).
V. I. Tret'yakov, Principles of the Metallurgy of Sintered Hard Alloys and Their Production Technology [in Russian], Metallurgiya, Moscow (1976).
I. V. Uvarova, “Catalytic action of palladium during the reduction of molybdenum oxides,” Izv. Akad. Nauk SSSR, Met., No. 4, 38–43 (1974).
I. V. Uvarova, V. V. Panichkina, and L. D. Konchakovskaya, “Low-temperature reduction of molybdenum and tungsten oxides,” Izv. Akad. Nauk SSSR, Met., No. 4, 86–91 (1972).
V. V. Panichkina and I. V. Uvarova, Methods for Controlling the Particle Size and Specific Surface of Metal Powders [in Russian], Naukova Dumka, Kiev (1973).
A. S. Grintsov, “An investigation of conditions of preparation of fine molybdenum alloy powders,” Candidate's Dissertation, Kiev (1977).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 7(187), pp. 9–12, July, 1978.
Rights and permissions
About this article
Cite this article
Uvarova, I.V. Effect of starting specific surface on the kinetics of tungsten trioxide reduction with hydrogen. Powder Metall Met Ceram 17, 500–502 (1978). https://doi.org/10.1007/BF00791920
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00791920