Soviet Powder Metallurgy and Metal Ceramics

, Volume 15, Issue 11, pp 854–856 | Cite as

Abrasive properties of pseudofused titanium carbide powder

  • G. V. Samsonov
  • A. A. Adamovskii
  • V. S. Polishchuk
  • N. I. Goncharova
Powder Metallurgical Materials, Parts, and Coatings
  • 17 Downloads

Conclusions

  1. 1.

    A study was made of the abrasive properties of pseudofused titanium carbide. It was established that titanium carbide with 17.4 wt.% or more of combined carbon is superior in abrasive power to white electrocorundum and titanium carbide melted in a Tammann furnace but inferior to titanium carbide produced by synthesis from the elements in plasma and by electric arc melting.

     
  2. 2.

    It is shown that pseudofused titanium carbide with 19.0 wt.% or more of combined carbon can be successfully used for short-time (up to 10–20 min) abrasive machining processes; in processes of longer duration faster rates of material removal are ensured by pseudofused titanium carbide containing from 17 to 19 wt.% of combined carbon.

     

Keywords

Titanium Furnace Carbide Fast Rate Material Removal 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    G. V. Samsonov and V. V. Stasovskaya, Abrazivy i Almazy, No. 6 (1965).Google Scholar
  2. 2.
    A. A. Adamovskii, A. L Bezykornov, O. G. Kiselev, and A. N. Rubtsov, Poroshk. Metall., No. 9 (1974).Google Scholar
  3. 3.
    G. V. Samsonov et al., Sintetich. Almazy, No. 4 (1973).Google Scholar
  4. 4.
    G. V. Samsonov, G. Sh. Upadkhaya, and V. S. Neshpor, Physical Metallurgy of Carbides [in Russian], Nauk. Dumka, Kiev (1974).Google Scholar
  5. 5.
    A. I. Bezykornov et al., Poroshk. Metall, No. 5 (1971).Google Scholar
  6. 6.
    M. M. Khrushchov and M. A. Babichev, Investigation of the Wear of Metals [in Russian], Izd-vo Akad. Nauk SSSR, Moscow (1960).Google Scholar
  7. 7.
    V. V. Stasovskaya, Poroshk. Metall., No. 11 (1965).Google Scholar
  8. 8.
    A. Ya. Artamonov, A. I. Bezykornov, and A. N. Ivanov, Poroshk. Metall., No. 9 (1966).Google Scholar
  9. 9.
    G. V. Samsonov et al., Dopovidi Akad. Nauk UkrSSR, Ser. A, No. 7, 661 (1974).Google Scholar

Copyright information

© Plenum Publishing Corporation 1977

Authors and Affiliations

  • G. V. Samsonov
    • 1
    • 2
  • A. A. Adamovskii
    • 1
    • 2
  • V. S. Polishchuk
    • 1
    • 2
  • N. I. Goncharova
    • 1
    • 2
  1. 1.Institute of Materials ScienceAcademy of Sciences of the Ukrainian SSRUkrain
  2. 2.Donetsk Chemical Reagent FactoryUSSR

Personalised recommendations