Conclusions
It has been established that 180 cycles of EDS in 3Kh2V8F steel PEs under the conditions employed in this work produce no changes in the structure of the electrodes which could have a significant deleterious effect on their physicomechanical properties.
Similar content being viewed by others
Literature cited
Kiyoshi Inoue, “Die used for electric discharge sintering,” Jpn. Pat. No. 25805, Feb. 2, 1968.
Kiyoshi Inoue, “Die and punches for sintering with the aid of an electric field,” Jpn. Pat. No. 5803, Jan. 1, 1974.
A. I. Raichenko, O. N. Ryabinina, A. A. Baidenko, et al., “Interaction process of electrode punches with metal powder at its electric discharge sintering,” in: Sintering Science and Technology, Belgrade (1977), pp. 199–201.
O. N. Ryabinina, A. I. Raichenko, A. D. Verkhoturov, et al., “Operating performance of steel punch electrodes for electric discharge sintering,” Poroshk. Metall., No. 9, 53–56 (1976).
O. N. Ryabinina, A. I. Raichenko, and G. L. Burenkov, “Structural changes occurring in compacts and tools during the electric discharge sintering of metal powder mixtures,” Poroshk. Metall., No. 11, 16–21 (1976).
Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1975).
N. F. Vyaznikov, Alloy Steel [in Russian], Metallurgizdat, Moscow (1963).
Encylopedia of Inorganic Materials [in Russian], Vol. 2, Ukrainskaya Sovetskaya Entsiklopediya, Kiev (1977).
O. N. Ryabinina, “Investigation of the reactions of refractory and heat-resisting materials with metal powders during electric discharge treatment,” Author's Abstract of Candidate's Dissertation, Kiev (1979).
A. I. Raichenko, G. G. Karyuk, and V. I. Leshchinskii, “Operating characteristics of diamond honing slips produced by the electric-discharge sintering method,” Poroshk. Metall., No. 8, 92–94 (1977).
O. N. Ryabinina, A. I. Raichenko, O. I. Fushchich, et al., “Reaction between a punch electrode and a metal powder during electric discharge sintering,” Poroshk. Metall., No. 3, 37–41 (1977).
V. N. Bakul', Yu. I. Nikitin, E. B. Vernik, and V. F. Selekh, Principles of Design and Production Technology of Abrasive and Diamond Tools [in Russian], Mashinostroenie, Moscow (1975).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 1(229), pp. 88–92, January, 1982.
Rights and permissions
About this article
Cite this article
Baidenko, A.A., Istomina, T.I., Svechkov, A.V. et al. Operating life of punch electrodes in the electric discharge sintering of copper-tin-abrasive composites. Powder Metall Met Ceram 21, 77–79 (1982). https://doi.org/10.1007/BF00791732
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00791732