Conclusions
By altering the processing parameters of plasma spray-deposition of composite metal-boron nitride materials, it is possible to vary within wide ranges the physicomechanical properties of soft sealing deposits of these materials. The strength, porosity, hardness, and solid lubricant content of metal-boron nitride sealing coatings are determined primarily by the physicomechanical properties of the metal and the amount of boron nitride in the composite being deposited and also by the particle size analysis of the charge. The effect of jet parameters on the properties of coatings varies depending on the nature of the composite material, which is mainly due to differences in the energetic levels and degrees of spheroidization of charge particles.
Similar content being viewed by others
Literature cited
M. E. Belitskii and A. L. Gaidarenko, “Reasons for the appearance of defects in the sealing units of the flow-through sections of turboprop and turbojet aero engines with the use of powder metallurgical materials,” Poroshk. Metall., No. 8, 92–100 (1969).
I. M. Fedorchenko, I. A. Kazantseva, and G. L. Dubrov, “Powder metallurgical material for radial sealing of high-temperature turbines,” Poroshk. Metall., No. 3, 90–95 (1969).
A. Hasui, Spray-Deposition Technology [Russian translation], Mashinostroenie, Moscow (1975).
F. I. Kitaev, Yu. G. Lekarev, and V. N. Litvinenko, “Investigation of the heating of metal-solid lubricant particles in the, plasma jet during the deposition of coatings,” Abstracts of Papers to the Seventh Conference on the Theory and Practice of Gasothermic Application of Coatings [in Russian], Dmitrov (1978), pp. 99–103.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 8(224), pp. 91–96, August, 1981.
Rights and permissions
About this article
Cite this article
Kitaev, F.I., Lekarev, Y.G. Properties of plasma-deposited composite metal-boron nitride coatings. Powder Metall Met Ceram 20, 589–593 (1981). https://doi.org/10.1007/BF00791713
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00791713