Literature cited
A. F. Zhornyak and V. E. Oliker, “Properties of iron powders produced from various iron-carbon melts,” Poroshk. Metall., No. 1, 7–13 (1978).
A. F. Zhornyak and V. E. Oliker, “Effect of particle-size distribution on the processing properties of atomized iron powder with and without a zinc stearate addition,” Poroshk. Metall., No. 4, 1–5 (1978).
A. F. Zhornyak and V. E. Oliker, “Effect of the particle-size distribution of atomized and reduced iron powders on some properties of materials produced from them by pressing and sintering,” Poroshk. Metall., No. 7, 86–90 (1978).
A. F. Zhornyak and V. E. Oliker, “Regularities of the formation of structure and mechanical properties in sintered materials from atomized iron powders,” Poroshk. Metall., No. 3, 48–54 (1979).
I. M. Fedorchenko and R. A. Andrievskii, Principles of Powder Metallurgy [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1963).
Yu. G. Dorofeev and B. G. Gasanov, “Recrystallization diagram of sintered iron produced by dynamic hot pressing,” Poroshk. Metall., No. 1, 45–47 (1978).
S. S. Gorelik, in: Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (1978), p. 568.
I. D. Radomysel'skii, A. F. Zhornyak, N. V. Andreeva, and G. P. Negoda, “The pack carburizing of dense parts from iron powder,” Poroshk. Metall., No. 3, 40–49 (1964).
A. K. Grabchak, E. L. PechentkovsKii, I. D. Radomysel'skii, G. G. Serdyuk, B. N. Beinisovich, V. A. Kutnyak, and I. S. Nikishov, “Hot bulk forging of parts from iron powder,” in: Sintered Constructional Materials [in Russian], Kiev (1976), pp. 29–32.
Yu. G. Dorofeev, Dyanmic Hot Pressing of Porous P/M Blanks [in Russian], Metallurgiya, Moscow (1977).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(209), pp. 6–12, May, 1980.
Rights and permissions
About this article
Cite this article
Zhornyak, A.F., Oliker, V.E., Morgun, G.N. et al. Correlation between some properties of atomized iron powders and materials produced from them by hot forging. Powder Metall Met Ceram 19, 302–307 (1980). https://doi.org/10.1007/BF00791548
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00791548