Conclusions
-
1.
A study was made of the process of disintegration of powder particle agglomerates in an alternating electric field generated by a plane capacitor with a narrow electrode gap. It is shown that the disintegration process could be employed for the preparation of powder samples for particle-size analysis.
-
2.
It has been established that the process of disintegration of powder particle agglomerates involves the action of both electrical forces and mechanical forces set up during collisions of particles with the electrode surfaces and with one another.
-
3.
Experiments have shown that in the disintegration of Al2O3 and Al powder particle agglomerates the best results are obtained at a field intensity E = (6–7) · 105 V/m, a frequency f = 225–300 Hz, and a treatment time t=4–6 min.
Similar content being viewed by others
Literature cited
I. A. Shvetsova, G. K. Koltunova, and Ya. I. Leikin, “Comparative characteristics of methods for the determination of the particle size of standard wheat flour,” Tr. Vses. Nauchno-Issled. Inst. Zerna i Produktov Ego Pererabotki, No. 74, 80–93 (1972).
Yu. M. Evdokimov, “An investigation of electric adhesion phenomena and of the possibility of establishing and breaking adhesional contacts by the action of an external electric field,” Author's Abstract of Candidate's Dissertation, Moscow (1968).
O. A. Myazdrikov, Differential Methods of Particle Size Determination [in Russian], Metallurgiya, Moscow (1974).
F. Weinberg (editor), Tools and Techniques in Physical Metallurgy, Marcel Dekker, New York (1970).
N. K. Naremskii, V. Ya. Gomolich, and A. N. Shabaev, “Classification of powders in the electric field of a plane capacitor,” Poroshk. Metall., No. 8, 10–13 (1975).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 9(177), pp. 1–5, September, 1977.
Rights and permissions
About this article
Cite this article
Naremskii, N.K. Disintegration of powder particle agglomerates under the action of an alternating electric field. Powder Metall Met Ceram 16, 657–660 (1977). https://doi.org/10.1007/BF00791461
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00791461