Advertisement

Soviet Powder Metallurgy and Metal Ceramics

, Volume 12, Issue 4, pp 272–276 | Cite as

Creep in the hot pressing of powders of titanium nitride, molybdenum disilicide, and zirconium and chromium diborides

  • M. S. Koval'chenko
Powder Metallurgical Materials, Parts, and Coatings
  • 36 Downloads

Conclusions

  1. 1.

    An analysis is made, using an equation of the densification of a porous solid incorporating a steadystate creep equation, of data yielded by an investigation into the effects of time, temperature, and applied pressure upon the relative density of titanium nitride, molybdenum disilicide, and zirconium and chromium diborides. It is shown that the equation can be employed for describing the densification kinetics of refractory compound powders during hot pressing.

     
  2. 2.

    It is demonstrated that the densification of molybdenum disilicide powder during hot pressing is effected throughα-creep at temperatures of 1600°C and lower, while at higher temperatures a short (∼3 min) stage of transient creep is followed by a stage of steady-state creep.

     
  3. 3.

    The energies of activation for the steady-state creep of the compounds investigated at sintering temperatures and the values of effective Laplacian pressure have been determined. The values of energy of activation for creep obtained correspond to the energies of activation for the self-diffusion of atoms in the metallic sublattices of the compounds under investigation.

     

Keywords

Titanium Zirconium Chromium Molybdenum Nitride 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    G. V. Samsonov, Refractory Compounds — A Handbook [in Russian], Metallurgizdat, Moscow (1962).Google Scholar
  2. 2.
    G. V. Samsonov, Nitrides [in Russian], Naukova Dumka, Kiev (1969).Google Scholar
  3. 3.
    G. V. Samsonov, Silicides and Their Uses in Engineering [in Russian], Izd-vo AN USSR, Kiev (1959).Google Scholar
  4. 4.
    G. V. Samsonov, L. Ya. Markovskii, et al., Boron and Its Compounds and Alloys [in Russian], Izd-vo AN USSR, Kiev (1960).Google Scholar
  5. 5.
    P. Chiotti, J. Am. Ceram. Soc.,35, 123 (1952).Google Scholar
  6. 6.
    M. A. Kuzenkova and P. S. Kislyi, Poroshkovaya Met., No. 5, 34 (1970).Google Scholar
  7. 7.
    M. A. Kuzenkova and P. S. Kislyi, Poroshkovaya Met., No. 2, 52 (1965).Google Scholar
  8. 8.
    P. S. Kislyi and M. A. Kuzenkova, Poroshkovaya Met., No. 1, 32 (1965).Google Scholar
  9. 9.
    G. V. Samsonov and T. S. Verkhoglyadova, Poroshkovaya Met., No. 2, 8 (1963).Google Scholar
  10. 10.
    R. Ya. Petrykina and L. K. Shvedova, Poroshkovaya Met., No. 4, 27 (1972).Google Scholar
  11. 11.
    F. Glaser, Powder Met. Bull.,6, 51 (1951).Google Scholar
  12. 12.
    M. S. Koval'chenko and G. V. Samsonov, Poroshkovaya Met., No. 2, 3 (1961).Google Scholar
  13. 13.
    M. S. Koval'chenko and L. F. Ochkas, Poroshkovaya Met., No. 1, 28 (1973).Google Scholar
  14. 14.
    M. S. Koval'chenko, Poroshkovaya Met., No. 10, 38 (1971).Google Scholar
  15. 15.
    J. Friedel, Les Dislocations, Gauthiers-Villars, Paris (1956).Google Scholar

Copyright information

© Consultants Bureau, a division of Plenum Publishing Corporation 1973

Authors and Affiliations

  • M. S. Koval'chenko
    • 1
  1. 1.Institute of Materials ScienceAcademy of Sciences of the Ukrainian SSRUkraine

Personalised recommendations