Advertisement

Soviet Powder Metallurgy and Metal Ceramics

, Volume 20, Issue 12, pp 854–862 | Cite as

Production and properties of dense P/M stainless steels

  • I. V. Nel'zina
  • I. D. Radomysel'skii
Powder Metallurgical Materials, Parts, and Coatings

Keywords

Stainless Steel 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    Yu. A. Gratsianov, B. N. Putimtsev, and A. F. Silaev, Metal Powders from Melts [in Russian], Metallurgiya, Moscow (1970).Google Scholar
  2. 2.
    Zh. I. Dzneladze, R. P. Shchegoleva, L. S. Golubeva, et al., Powder Metallurgy of Steels and Alloys [in Russian], Metallurgiya, Moscow (1978).Google Scholar
  3. 3.
    I. D. Radomysel'skii, S. G. Napara-Volgina, and S. M. Kazimirenko, “Conditions of preparation of iron-chromium powders by the diffusion-impregnation technique,” Poroshk. Metall., No. 8, 10–16 (1969).Google Scholar
  4. 4.
    I. D. Radomysel'skii, S. G. Napara-Volgina, V. B. Deimontovich, et al., “Properties of iron-chromium steel powders prepared by diffusion impregnation from point sources,” Poroshk. Metall., No. 11, 1–6 (1971).Google Scholar
  5. 5.
    T. Kato, “Specific features of the manufacture of stainless steel powders,” Kindzoku,47, No. 11, 36–40 (1977).Google Scholar
  6. 6.
    “Atomized stainless steel powder and properties of materials produced from it,” Met. Mater., No. 11, 39–40 (1975).Google Scholar
  7. 7.
    V. A. Dovydenkov, I. D. Radomysel'skii, and S. G. Napara-Volgina, “Methods of production and properties of sintered stainless steels for machine components,” Poroshk. Metall., No. 5, 51–62 (1978).Google Scholar
  8. 8.
    J. Bark and W. Weiss (eds.), Powder Metallurgy of Materials for Special Applications [Russian translation], Metallurgiya, Moscow (1977).Google Scholar
  9. 9.
    F. Eisenkolb, Advances in Powder Metallurgy [Russian translation], Metallurgiya, Moscow (1963).Google Scholar
  10. 10.
    Zh. I. Dzneladze, R. P. Shchegoleva, L. S. Golubeva, et al., Powder Metallurgy of Steels and Alloys [in Russian], Metallurgiya, Moscow (1978).Google Scholar
  11. 11.
    F. F. Khimushin, Stainless Steels [in Russian], Metallurgiya, Moscow (1967).Google Scholar
  12. 12.
    L. M. Apininskaya, N. M. Vergeles, S. G. Napara-Volgina, et al., “Investigation of the corrosion resistance of stainless steels produced from alloy powders,” in: Constructional Materials [in Russian], Kiev (1980), pp. 141–151.Google Scholar
  13. 13.
    R. Oville, “Stainless steel produced by sintering in the presence of a liquid phase,” U.S. Pat. No. 699826, June 28, 1977.Google Scholar
  14. 14.
    “Stainless steel sintered in a liquid phase,” U.S. Pat. No. 4032336, May 30, 1977.Google Scholar
  15. 15.
    “Stainless steel produced by sintering in a liquid phase,” U.S. Pat. No. 3980444, 1976.Google Scholar
  16. 16.
    S. V. Ivanova and E. V. Lysenko, “Corrosion resistance of materials based on stainless steels,” in: Sintered Constructional Materials [in Russian], Kiev (1976), pp. 151–156.Google Scholar
  17. 17.
    I. D. Radomysel'skii, S. V. Ivanova, E. V. Lysenko, and N. I. Shcherban', “Corrosion resistance of metal-plastics materials,” in: P/M Constructional Materials [in Russian], Kiev (1980), pp. 36–38.Google Scholar
  18. 18.
    I. D. Radomysel'skii, S. V. Ivanova, M. E. Belitskii, and N. I. Shcherban', “Oxidation resistance of sintered composite materials of the stainless steel-glass type,” in: P/M Constructional Materials [in Russian], Kiev (1980), pp. 90–91.Google Scholar
  19. 19.
    B. A. Borok, R. P. Shchegoleva, L. S. Golubeva, et al., “Preparation and properties of stainless steel powder,” Poroshk. Metall., No. 3, 1–9 (1969).Google Scholar
  20. 20.
    T. Nakagawa, “Growth tendency in powder press forging,” Kindzoku Dzaire,16, 77–81 (1976).Google Scholar
  21. 21.
    R. C. Brook, G. A. Coombs, A. G. Leatham, et al., “Structure and properties of some aerospace alloys produced by press forging spray-formed blanks,” Transactions of an International Powder Metallurgy Conference, Chicago, Vol. 2, No. 7, Princeton (1977), pp. 1–12.Google Scholar
  22. 22.
    Ohara Kunio and Sato Rokiro, “Press forming of sintered preforms from stainless steel powders,” Denki Seiko, Elec. Furnace Steel,48, No. 2, 128–131 (1977).Google Scholar
  23. 23.
    D. Raubould, “Dynamic and quasistatic pressing of stainless steel swarf,” Proceedings of an International Machine Tool Design Conference, Birmingham (1977), pp. 497–505.Google Scholar
  24. 24.
    Technical Pamphlet, Krebsöge GmbH, Sintermetallwerk, W. Germany (1977).Google Scholar
  25. 25.
    “Supermet powdered metal products,” TPW Co. Bull. (1977).Google Scholar
  26. 26.
    M. S. McLean, W. E. Campbell, and R. J. Dower, “Dependence of the mechanical properties of metal powder forgings on processing conditions,” Powder Met, Int.,7, No. 3, 118–120 (1975).Google Scholar
  27. 27.
    Yu. G. Dorofeev, Dynamic Hot Pressing in Powder Metallurgy [in Russian], Metallurgiya, Moscow (1972).Google Scholar
  28. 28.
    Yu. G. Dorofeev, Dynamic Hot Pressing of Porous P/M Blanks [in Russian], Metallurgiya, Moscow (1977).Google Scholar
  29. 29.
    S. Glisnikovsky and I. Pisch, “Press forging of sintered steels: new scope for powder metallurgy,” Strojirenska Viroba,23, No. 7, 493–497 (1975).Google Scholar
  30. 30.
    “P/M press forging process,” Precision Met. Molding,37, No. 7, 20–23 (1979).Google Scholar
  31. 31.
    “Hot-formed powder metal parts: a reality at last,” Mater. Eng., No. 4, 41–44 (1978).Google Scholar
  32. 32.
    C. A. Wick, “Hot press forging of powder compacts,” Manuf. Eng.,80, No. 5, 34–39 (1978).Google Scholar
  33. 33.
    W. J. Huppmann and M. A. Hirschvogel, “Press forging of sintered blanks,” Int. Met. Rev.,23, No. 5, 209–239 (1978).Google Scholar
  34. 34.
    W. J. Huppmann, “Steel powder forging process,” Powder Metall., No. 2, 105–112 (1978).Google Scholar
  35. 35.
    I. D. Radomysel'skiii V. A. Dovydenkov, and I. V. Nel'zina, “Production and properties of high-density Kh13 steel,” in: P/M Constructional Materials [in Russian], Kiev (1980), pp. 27–29.Google Scholar
  36. 36.
    F. Amano and T. Nakagawa, “Powder press forming and forging,” Sosei to Kako,17, No. 185, 527–532 (1976).Google Scholar
  37. 37.
    “Production of parts from metal powders,” Austrian Pat. No. 80346175, Mar. 14, 1978.Google Scholar
  38. 38.
    Saito Yuiti, Kindzima Masayuki, and Kohara Kunio (Mitsubishi Kindzoku k. k.), “Method of production of high-density parts from high-alloy steel powders,” Jpn. Pat. No. 513996, July 23, 1977.Google Scholar
  39. 39.
    R. A. Andrievskii and S. M. Solonin, “A study of the sintering of chromium-nickel steel powders,” Poroshk. Metall., No. 3, 32–39 (1964).Google Scholar
  40. 40.
    I. M. Fedorchenko, I. G. Slys', I. I. Odokienko, and B. Ya. Kosov, “Activated sintering of atomized OKh18N9 steel powder,” Poroshk. Metall., No. 12, 26–29 (1976).Google Scholar
  41. 41.
    S. K. Chatterjee and C. J. Thwaites, “Zinnzusätze beim Sintern von rostfrein Stahl,” Metall.,24, No. 9, 968–969 (1970).Google Scholar
  42. 42.
    V. P. Sorokin, “Effect of small copper additions on the sintering of stainless steel,” Izv. Vyssh. Uchebn. Zaved., Chern. Metall., No. 11, 127–128 (1966).Google Scholar
  43. 43.
    I. G. Slys', E. N. Ermakova, and V. S. Klimenko, Technology for the Production of New Materials [in Russian], Kiev (1972).Google Scholar

Copyright information

© Plenum Publishing Corporation 1982

Authors and Affiliations

  • I. V. Nel'zina
    • 1
  • I. D. Radomysel'skii
    • 1
  1. 1.Institute of Materials ScienceAcademy of Sciences of the Ukrainian SSRUkraine

Personalised recommendations