Literature Cited
B. A. Brusilovskii and F. I. Ivanov, "X-ray study of low-temperature tempering of rolls for cold-rolling mills," Fiz. Met. Metalloved.,19, No. 1, 147 (1965).
B. A. Brusilovskii and F. I. Ivanov, "Effect of retained austenite on the operating characteristics of rolls in cold-rolling mills," Metalloved. Term. Obrab. Met., No. 1, 64 (1967).
V. N. Novikov et al., Rolls for Cold-Rolling Plate Mills [in Russian], Metallurgiya, Moscow (1970), p. 335.
T. V. Yushantseva and N. P. Nagornov, "Hardenability of rolls 270 mm in diameter for cold-rolling mills with heating by current of commercial frequency," in: Metal Science [in Russian], No. 7, Sudostroenie, Leningrad (1969), pp. 3–18.
Ya. S. Umanskii, X-Ray Analysis of Metals and Semiconductors [in Russian], Metallurgiya, Moscow (1969).
B. A. Brusilovskii and F. I. Ivanov, "New method of hardening rolls for cold-rolling mills," Metalloved. Term. Obrab. Met., No. 3, 17 (1968).
A. I. Kondrashov, V. A. Kamalov, and K. F. Gurzhienko, "Improving the heat treatment of rolls for cold-rolling mills," in: Forging and Heat Treatment [in Russian], No. 5, Sudpromgiz, Leningrad (1959), p. 70.
R. I. Éntin, Transformation of Austenite in Steel [in Russian], GNTI, Moscow (1960).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 53–54, May, 1979.
Rights and permissions
About this article
Cite this article
Brusilovskii, B.A., Grushko, Y.A. & Geller, A.L. Distribution of retained austenite in the hardened layer of rolls for cold-rolling mills. Met Sci Heat Treat 21, 390–392 (1979). https://doi.org/10.1007/BF00780786
Issue Date:
DOI: https://doi.org/10.1007/BF00780786