Literature cited
S. Ya. Shipitsyn, Yu. Z. Babaskin, V. P. Abramova, et al., "The effect of adding particles of nitride and carbide compounds on the properties of steel 2Kh21N11V2L," in: New Methods of Strengthening Casting Alloys [in Russian], IPL AN USSR, Kiev (1977), pp. 39–81.
Yu. Z. Babaskin, The Structure and Properties of Cast Steel [in Russian], Naukova Dumka, Kiev (1980).
M. I. Gol'dshtein and V. M. Farber, Dispersion Hardening of Steel [in Russian], Metallurgiya, Moscow (1979).
V. V. Goryushin, Yu. Z. Babaskin, G. S. Nikolaev, et al., "The properties of steel 5KhNM modified by nitrides," Metalloved. Term. Obrab. Met., No. 9, 41 (1980).
S. Ya. Shipitsyn, Yu. Z. Babaskin, and G. D. Semenyaka, "The effect of vanadium nitride modification and strengthening on the properties of die steel," Liteinoe Proizvod., No. 10, 7–9 (1983).
A. Kelly and R. Nicholson, Dispersion Hardening [Russian translation], Metallurgiya, Moscow (1966).
R. W. Honeycombe, Plastic Deformation of Metals, St. Martin (1968).
P. V. Ryabko and K. P. Ryaboshapka, "The theory of yield strength of heterogeneous systems with ordered segregations," Metallofizika, No. 42, 3–18 (1972).
I. F. Ashby, "Orowan stress," in: The Physics of Strength and Ductility [in Russian], Metallurgiya, Moscow (1972), pp. 88–107.
A. N. Morozov, Hydrogen and Nitrogen in Steel [in Russian], Metallurgiya, Moscow (1968).
S. A. Dovnar, The Thermomechanics of Strengthening and of Failure of Dies for Closed Impression Die Forging [in Russian], Mashinostroenie, Moscow (1975).
Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1983).
Yu. M. Skrynchenko and L. A. Poznyak, Durability and Properties of Tool Steels [in Russian], Naukova Dumka, Kiev (1979).
P. Gyumpel', "Review of the literature on tool steels for hot forming," Chernye Met., No. 16, 33–39 (1981).
Yu. M. Pamarin, I. V. Sheiko, G. M. Grigorenko, et al., "Investigation of the solubility of nitrogen under elevated pressure in the low carbon stainless steel 03Kh25N5AM3," in: Problems of Special Electrometallurgy [in Russian], Issue 14, Naukova Dumka, Kiev (1981), pp. 84–88.
L. A. Poznyak, S. I. Tishaev, Yu. N. Skrynchenko, et al., Tool Steels (Handbook) [in Russian], Metallurgiya, Moscow (1977).
Additional information
G. D. Semenyaka, A. S. Zhitnik, and V. M. Antonyuk took part in the work.
Institute of Casting, Academy of Sciences of the Ukrainian SSR. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 47–49, July, 1986.
Rights and permissions
About this article
Cite this article
Shipitsyn, S.Y., Babaskin, Y.Z. & Smolyakova, L.G. Nitridovanadizing of die steels. Met Sci Heat Treat 28, 512–515 (1986). https://doi.org/10.1007/BF00780644
Issue Date:
DOI: https://doi.org/10.1007/BF00780644