Literature cited
Yu. F. Chernyi et al., "Effect of hydrostatic extrusion on the structure and properties of tool steels", in: Effect of High Pressures on Substances [in Russian], Kiev (1976), p. 81.
V. S. Koviko and B. M. Orekhov, "Production tests of metalcutting tools, manufactured by hydrostatic extrusion", in: Effect of High Pressures on Substances [in Russian], Kiev (1976), p. 108.
Yu. F. Chernyi et al., "Hydrostatic extrusion of metalcutting tools," Vestn. Mashinostr., No. 1, 27 (1976)
Yu. F. Chernyi et al., "Commercial use of hydrostatic extrusion for tools of steels R18, R12, and R9," Kuznechno-Shtampovochnoe Proizvod., No. 8, 12 (1971).
Yu. F. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1975).
A. P. Gulyaev et al., Tool Steels. Handbook [in Russian], Mashinostroenie, Moscow (1975).
G. Williamson and R. Smallman, Phil. Mag., No. 1, 34 (1956).
B. G. Livshits, Physical Properties of Metals and Alloys [in Russian], Mashinostroenie, Moscow (1959).
S. A. Saltykov, Stereometric Metallography [in Russian], Metallurgiya, Moscow (1970).
V. N. Gridnev, Strength and Ductility of Cold Worked Steel [in Russian], Naukova Dumka, Kiev (1974).
Additional information
Donets Physicotechnical Institute, Academy of Sciences of the Ukrainian SSR. Kommunarsk Mining-Metallurgical Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 56–58, July, 1978.
Rights and permissions
About this article
Cite this article
Chernyi, Y.F., Koviko, V.S., Ershov, V.M. et al. Phase composition and physical properties of tool steels after hydrostatic extrusion. Met Sci Heat Treat 20, 578–581 (1978). https://doi.org/10.1007/BF00780342
Issue Date:
DOI: https://doi.org/10.1007/BF00780342