Advertisement

Soviet Powder Metallurgy and Metal Ceramics

, Volume 7, Issue 8, pp 593–595 | Cite as

Relationship between the maximum thickness and width of roll-compacted strip

  • V. A. Spinov
  • G. A. Vinogradov
Theory and Technology of the Component Formation Process

Conclusions

  1. 1.

    The greatest thickness of green strip produced by rolling powders in plain rolls with the use of suspension hoppers depends, other conditions being equal, on strip width and increases with the latter. At the same time, the growth of the maximum strip thickness increases with increasing roll diameter.

     
  2. 2.

    This phenomenon may be utilized for increasing strip thickness at unchanged roll diameter: Strip with a width equal to a multiple of the required width is produced and is then longitudinally sectioned into narrow strips.

     

Keywords

Maximum Thickness Thickness Increase Strip Width Narrow Strip Great Thickness 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    G. A. Vinogradov, Poroshkovaya Met., No. 4, 63 (1962).Google Scholar
  2. 2.
    V. A. Spinov, G. A. Vinogradov, and G. Ya. Kalutskii, Poroshkovaya Met., No. 8, 97 (1967).Google Scholar
  3. 3.
    G. A. Vinogradov and I. D. Radomysel'skii, Compaction and Rolling of Metal Powders [in Russian], Mashgiz, Moscow (1963), p. 133.Google Scholar

Copyright information

© Consultants Bureau 1969

Authors and Affiliations

  • V. A. Spinov
    • 1
  • G. A. Vinogradov
    • 1
  1. 1.Institute of Materials ScienceAcademy of Sciences of the Ukrainian SSRUSSR

Personalised recommendations