Conclusions
In this article we have shown the basic directions of Czech investigations in the area of cermet friction materials. The introduction of friction materials into production in a quantity and variety corresponding to Czech standards is a result of these studies. The experiments have helped to achieve world standards for these materials. Work to improve them is continuing.
Similar content being viewed by others
Literature cited
V. Dufek, Kovokeramicke Treci Materialy, Praha SNTL (1965).
V. Dufek and J. Miculek, Pokroky Praskova Metalurgie,3, 3 (1965).
V. Dufek, Sbornik z III. Mezinarodni Konference o PM v Eisenachu (1965).
V. Dufek, Neue Hutte, H. 5, S. 299 (1963).
F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Clarendon Press, Oxford (1954).
G. M. Lavrukhin and N. N. Gnatyshak, Avtomobil'naya Promyshlennost', 41 (1965).
P. Herscovici, V. Manolache, and A. Storin, Cercetari Metalugice, 5, 367 (1963).
J. Miculek, V. Dufek, and F. Kobes, Prednaska na II. Celostatni Konferenci o KTM, Kouty (1965).
J. Danek a kol., Intensifikace Vyroby v Praskove Metalurgii, Hutnik, 8 (1962).
V. Dufek, A. Navratil, and J. Miculek, Annual meeting, PM Joint Group, London (1966).
P. I. Bebnev, In the collection: Powder Metallurgy [in Russian], Yaroslavl', 223 (1956).
El. Strobel, Die Technik,12, 12, 819, viz tez NDR pat. 18191 (1957).
Brit. Pat., 808163, Swedske Firmy Haganas.
V. Dufek and J. Miculek, Hutnicke Fisty, 8 (1966).
H. B. Huntress, Cermets, Reinhold Publ. Co., New York, 253 (1960).
B. T. Collins and C. P. Schneider, Reprint 55, Inter. Powder Metallurgy, Conference MPIF, New York (1965).
M. Humenik, D. W. Hall, and R. L. van Alsten, Metall Progress, April, 101 (1962).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 6 (54), pp. 100–111, June, 1967.
Rights and permissions
About this article
Cite this article
Dufek, V., Miculek, J. Investigation of cermet friction materials in Czechoslovakia. Powder Metall Met Ceram 6, 507–515 (1967). https://doi.org/10.1007/BF00780143
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00780143