Advertisement

Strength of Materials

, Volume 23, Issue 12, pp 1295–1302 | Cite as

Deformation and failure of boron-aluminum with a complex stressed state

  • S. V. Tsvetkov
  • P. A. Zinov'ev
  • A. N. Eremichev
  • V. I. Tsyrul'
  • V. E. Bukharin
  • Yu. G. Bushuev
Scientific-Technical Section
  • 23 Downloads

Abstract

The mechanical properties of boron-aluminum with a volume content of boron fibers of 0.39 are studied by experiment. Tests on tubular specimens are carried out under the action of tension (compression), torsion, and internal (external) pressure. Tests are also carried out for extension of annular specimens. Standard test machines and an experimental device are used for the tests. Different criteria are analyzed for strength from the point of view of the best description of experimental data. A mechanism is considered for damage accumulation and material failure.

Keywords

Experimental Data Mechanical Property Boron Stressed State Test Machine 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    D. Kenaga, J. F. Doyle, and C. T. Sun, “Characterization of boron/aluminum composite in the nonlinear range as an orthotropic elastic-plastic material,” J. Comp. Mater.,21, 516–531 (1987).Google Scholar
  2. 2.
    P. A. Zinov'ev, L. M. Polyntsov, and S. V. Tsvetkov, “Device for studying the processes of deformation and failure of composite materials with a volumetric stressed state,” in: Application of Plastics in Engineering: Proc. N. É. Bauman Moscow Higher Technical School [in Russian], No. 22, 20–29 (1987).Google Scholar
  3. 3.
    W. Wakashima and S. Umekawa, “Fiber-composite response to hydrostatic states of stress,” Met. Trans.,7A, 1952–1954 (1976).Google Scholar
  4. 4.
    E. M. Wu, “Optimal experimental measurements of anisotropic failure tensors,” J. Comp. Mater.,6, 472–489 (1972).Google Scholar
  5. 5.
    E. V. Meshkov, V. I. Kulik, Z. T. Upitis, and R. B. Rikarde, “Determination of coefficients in tensor-polynomial failure criteria,” Probl. Prochn., No. 9, 66–72 (1987).Google Scholar
  6. 6.
    E. M. Wu, “Phenomenological failure criteria for anisotropic materials,” in: Mechanics of Composite Materials, (J. Sindetsky Materials, J. Sindetsky (ed.) [Russian translation], Vol. 2, Mir, Moscow, pp. 401–491.Google Scholar

Copyright information

© Plenum Publishing Corporation 1992

Authors and Affiliations

  • S. V. Tsvetkov
    • 1
    • 2
  • P. A. Zinov'ev
    • 1
    • 2
  • A. N. Eremichev
    • 1
    • 2
  • V. I. Tsyrul'
    • 1
    • 2
  • V. E. Bukharin
    • 1
    • 2
  • Yu. G. Bushuev
    • 1
    • 2
  1. 1.N. É. Bauman Scientific-Research Institute of Special EngineeringMoscow State UniversityUSSR
  2. 2.State Committee for Science and TechnologyUSSR

Personalised recommendations