Conclusions
-
1.
The T-T-T diagram for steel 25KhGMNTB is complex; the stability of austenite is high in the pearlitic range and especially in the range of 550°.
-
2.
The best mechanical properties meeting the requirements for steels used for anchor chains with high strength can be obtained by means of the following heat treatment: normalization at 930° + quenching from the intercritical range of Ac1+(40–60°)+tempering at 600° and cooling in water.
Similar content being viewed by others
Literature Cited
N. A. Polushkin et al., “Kinetics of decomposition of supercooled austenite in low-alloy structural steels,” in: Research and Development of Technological Processes in Shipbuilding and Overhauling [in Russian], No. 170, GIIVT, Gorki (1979), p. 3.
N. A. Polushkin et al., “Phase transformations during heat treatment of low-alloy structural steels,” in: Strength and Reliability of Machine Parts [in Russian], No. 162, part 1, GIIVT, Gorki (1978), p. 3.
A. M. Polyakova and V. D. Sadovskii, “Intercritical quenching of structural steels,” Metalloved. Term. Obrab. Met., No. 1, 5 (1970).
A. A. Astaf'ev et al., “Heat treatment of steel 10GN2MFA in the intercritical range,” in: Transactions of the Scientific-Research Institute of Heavy Machine Construction [in Russian], No. 255, Moscow (1977), p. 10.
B. A. Marchenko, “Quenching of steels from intercritical temperatures,” Metalloved. Term. Obrab. Met., No. 3, 57 (1975).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 46–48, November, 1980.
Rights and permissions
About this article
Cite this article
Polushkin, N.A., Krasotskaya, S.N., Dmitriev, V.P. et al. Heat treatment of low-alloy structural steel 25KhGMNTB. Met Sci Heat Treat 22, 835–838 (1980). https://doi.org/10.1007/BF00779439
Issue Date:
DOI: https://doi.org/10.1007/BF00779439