Conclusion
To obtain a fine-grained, equiaxial structure of the ferritic steel 02Kh18Yu3B after hot rolling, the regime of the subsequent heat treatment has to be suitably chosen. The strongly textured structure of hot-rolled sheet of steel 02Kh18Yu3B can be corrected by heating the steel to 900°C, holding for 1 h, and cooling in water; the impact toughness of the steel then increases, and the critical brittle temperature shifts toward lower temperatures.
Similar content being viewed by others
Literture cited
A. I. Maksimov et al., “Ferritic oxidation resistant steel with low-carbon content for high-temperature recuperators and electric filters,” in: Proceedings of TsNIITMASh, No. 143, 64 (1978).
A. P. Gulyaev and A. N. Levanova, “Brittleness of high-chromium ferritic stainless steels,” Metalloved. Term. Obrab. Met., No. 11, 2 (1978).
A. A. Babakov and M. V. Pridantsev, Corrosion Resistant Steels and Alloys [in Russian], Metallurgiya, Moscow (1971).
A. A. Babakov and S. A. Golovanenko, “Principal properties and special features of the production technology of stainless nickel-free steels and steels with low nickel content,” Stal', No. 6, 539 (1977).
E. A. Ul'yanin, Corrosion Resistant Steels and Alloys (Handbook) [in Russian], Metallurgiya, Moscow (1980).
Additional information
Scientific and Production Association of the Central Research Institute of Engineering Technology (NPO TsNIITMASh). Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 54–56, April, 1983.
Rights and permissions
About this article
Cite this article
Parshin, Y.N., Ryabchenkov, A.V., Maksimov, A.I. et al. Effect of heat treatment on the structure and proneness to embrittlement of oxidation-resistant ferritic steel 02Kh18Yu3B. Met Sci Heat Treat 25, 312–315 (1983). https://doi.org/10.1007/BF00778331
Issue Date:
DOI: https://doi.org/10.1007/BF00778331