Conclusions
-
1.
Plasma hardening of steels provides hardened layers which in hardness, thickness, and wear resistance meet the requirements for hardened surfaces of many parts of various types of machines.
-
2.
From the results of production and testing under service conditions of lots of hydraulic motor stators and troughs of conveyers it was established that plasma hardening provides high part life and a decrease in the labor requirement for their production.
-
3.
According to preliminary determinations, plasma hardening is promising primarily for local surface hardening of parts. However, the area of use of this method may be quite broad, which requires further study.
Similar content being viewed by others
Literature cited
S. V. Serensen, “Fatigue resistance in connection with hardening and design factors,” in: Increasing the Fatigue Strength of Machine Parts by Surface Treatment [in Russian], Mashgiz, Moscow (1952), p. 7.
B. F. Balashov, “Nitriding as a method of increasing the strength of machine parts,”-ibidIncreasing the Fatigue Strength of Machine Parts by Surface Treatment [in Russian], Mashgiz, Moscow (1952), p. 71.
Additional information
Experimental Scientific-Research Institute for Metal Cutting Machine Tools. All-Union Scientific-Research, Planning, and Technological Institute for Coal Machinery. Institute of the Science of Machines. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 2–5, April, 1983.
Rights and permissions
About this article
Cite this article
Linnik, V.A., Onegina, A.K., Andreev, A.I. et al. Surface hardening of steels by plasma hardening. Met Sci Heat Treat 25, 241–245 (1983). https://doi.org/10.1007/BF00778313
Issue Date:
DOI: https://doi.org/10.1007/BF00778313