Metal Science and Heat Treatment

, Volume 20, Issue 3, pp 230–231 | Cite as

Superplasticity of alloy V96Ts

  • M. Kh. Rabinovich
  • O. A. Kaibyshev
  • V. G. Trifonov
Technical Information


Alloy V96Ts with a fine-grained structure (grain diameter 5 μ) exhibits superplasticity in tension at strain rates of 2.8·10−4 to 5.5·10−3 sec−1 at 460–470°. In the superplastic condition the samples elongate evenly without necking.


Superplastic Condition Alloy V96Ts 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Literature cited

  1. 1.
    Commercial, Wrought, Special, and Cast Aluminum Alloys. Handbook [in Russian], S. I. Krasov and I. N. Fridlyander (editors), Metallurgiya, Moscow (1972), p. 551.Google Scholar
  2. 2.
    B. A. Kolachev, V. A. Livanov, and V. I. Elagin, Metal Science and Heat Treatment of Nonferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1972), p. 480.Google Scholar
  3. 3.
    O. A. Kaibyshev, Plasticity and Superplasticity of Metals [in Russian], Metallurgiya, Moscow (1975), p. 280.Google Scholar
  4. 4.
    W. Backofen, J. Turner, and D. Avery, TASM,57, 980 (1964).Google Scholar

Copyright information

© Plenum Publishing Corporation 1978

Authors and Affiliations

  • M. Kh. Rabinovich
  • O. A. Kaibyshev
  • V. G. Trifonov

There are no affiliations available

Personalised recommendations