Advertisement

Metal Science and Heat Treatment

, Volume 33, Issue 1, pp 61–64 | Cite as

Effect of methods of heating during sintering on the properties of iron-base powder materials

  • N. A. Nikishov
  • I. V. Bogolyubova
  • N. V. Nikitina
Powder Metal Materials

Conclusions

  1. 1.

    The use of induction instead of furnace heating during the sintering of powder materials of different compositions leads to the formation of a structure with no, or only a small quantity of, excess carbide phase.

     
  2. 2.

    Induction heating improves the sintering of powder materials, as shown by a decrease in the proportion of intergranular fracture in the fractured surface of rings.

     
  3. 3.

    The highest level of strength and plasticity was obtained in rings sintered by induction heating, prepared from ultrapack and primary carbides.

     

Keywords

Furnace Carbide Powder Material Intergranular Fracture Induction Heating 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Plenum Publishing Corporation 1991

Authors and Affiliations

  • N. A. Nikishov
  • I. V. Bogolyubova
  • N. V. Nikitina

There are no affiliations available

Personalised recommendations