Advertisement

Strength of Materials

, Volume 22, Issue 1, pp 33–38 | Cite as

Fracture mechanics of multilayer and reinforced spherical type pressure vessels at reduced test temperature

  • S. V. Serikov
  • Yu. I. Pashkov
  • V. V. Kalugin
  • V. N. Smirnyagin
  • N. A. Zvonarev
Scientific and Technical Section

Abstract

The results of experimental investigations of the strength of spherical metal shells under internal hydrostatic loading are analyzed. The characteristic features of fracture of a spherical pressure vessel at a test temperature of 210–215 K are revealed.

Keywords

Experimental Investigation Characteristic Feature Fracture Mechanic Test Temperature Pressure Vessel 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    B. E. Paton (ed.), Multilayer Welded Structures and Pipe: Materials of the First Ail-Union Conference [in Russian], Naukova Dumka, Kiev (1984).Google Scholar
  2. 2.
    I. F. Obraztsov, V. V. Vasil'ev, and V. A. Bunakov, The Optimum Reinforcing of Shells of Rotation of Composite Materials [in Russian], Mashinostroenie, Moscow (1977).Google Scholar
  3. 3.
    G. P. Zaitsev, S. B. Cherevatskii, A. Kh. Valiullin, et al., “The fracture mechanics of a combined tank in sudden formation of a hole in it”, Mekh. Komp. Mater., No. 1, 88–91 (1986).Google Scholar
  4. 4.
    V. P. Larionov, R. S. Grigor'ev, and A. V. Lyglaev, “An analysis of low-temperature failures of machine parts and structural elements”, in: The Strength of Materials and Structural Elements at Low Temperatures [in Russian], Naukova Dumka, Kiev (1984), pp. 135–140.Google Scholar
  5. 5.
    G. S. Pisarenko and V. A. Strizhalo, “Certain problems of low-temperature strengthening of metals and taking it into consideration in low-temperature technology”, in: The Strength of Materials and Structures at Low Temperatures [in Russian], Naukova Dumka, Kiev (1984), pp. 3–12.Google Scholar
  6. 6.
    N. K. Kucher, N. I. Rudnitskii, A. L. Kaplinskii, and V. A. Strizhalo, “The influence of low temperatures on the deformation of a spherical high pressure vessel,” in: The Strength of Materials and Structures at Low Temperatures [in Russian], Naukova Dumka, Kiev (1984), pp. 127–135.Google Scholar
  7. 7.
    V. A. Kovtunenko, N. A. Zvonarev, V. V. Kalugin, et al., “A quantitative evaluation of fragment formation in failure of spherical pressure vessels under low-temperature conditions”, in: Summaries of Papers for the 2nd All-Union Conference on “The Strength of Materials and Structures at Low Temperatures” [in Russian], Inst. Probl. Prochn. Akad. Nauk UkrSSR, Kiev (1986), p. 49.Google Scholar
  8. 8.
    G. S. Pisarenko (editor), The Strength of Materials and Structural Elements under Extreme Conditions: In Two Volumes [in Russian], Vol. 2, Naukova Dumka, Kiev (1980).Google Scholar
  9. 9.
    S. V. Serikov, “Evaluation of the limiting deformation in fracture of metal pipe under the action of intense loads”, Zh. Prikl. Mekh. Tekh. Fiz., No. 1, 155–163 (1987).Google Scholar
  10. 10.
    G. I. Fedenko, “Calculation of stress concentration in the area of the joint of a cylindrical shell with a fitting under internal pressure”, Probl. Prochn., No. 5, 59–65 (1972).Google Scholar

Copyright information

© Plenum Publishing Corporation 1990

Authors and Affiliations

  • S. V. Serikov
    • 1
    • 2
  • Yu. I. Pashkov
    • 1
    • 2
  • V. V. Kalugin
    • 1
    • 2
  • V. N. Smirnyagin
    • 1
    • 2
  • N. A. Zvonarev
    • 1
    • 2
  1. 1.Ural Scientific-Research Industry for the Pipe IndustryChelyabinsk
  2. 2.Kiev

Personalised recommendations