Summary
An experimental investigation was carried out into the processes taking place during the sintering of powder alloys of the systems Cu-Cd and Ag-Cd. The method of sintering Cu-Cd and Ag-Cd alloys with a given cadmium content is discussed. Results are presented of tests of electrical breaking contacts made of a Cu-Cd (99% Cu, 1%Cd) and a Ag-Cd-base (76.5%Ag, 22% Cd, 1%Ni, 0.5%Fe) powder alloys.
Similar content being viewed by others
Literature cited
M. P. Slavinskii, Physicochemical Properties of Elements [in Russian], Moscow, Metallurgizdat, (1952).
S. A. Pogodin, Conductor and Rheostat Alloys [in Russian] ONTI, (1936).
A. B. Al'tman and É. S. Bystrova, Byul. Izobretenii, 1, No. 135222 (1961).
A. B. Al'tman and É. S. Bystrova, Byul. Izobretenii, 1, No. 108664 (1958).
V. V. Pasynkov, Handbook of Electrical Engineering Materials [in Russian] Moscow, Gosénergoizdat,2, (1960).
A. B. Al'tman and É. S. Bystrova, Collection: Electric Contacts [in Russian] Moscow, Gosénergoizdat, (1960).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Al'tman, A.B., Bystrova, É.S. The sintering of Cu-Cd and Ag-Cd powder alloys. Powder Metall Met Ceram 3, 283–287 (1964). https://doi.org/10.1007/BF00774171
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00774171