Summary
-
1.
A study was made of the effect of temperature and holding duration on the alloy formation process in the system YB6-LaB6 during the simultaneous reduction of oxides with boron in a vacuum. The optimum conditions of preparation of these alloys are a temperature of 1850°C and a holding period of 1 h.
-
2.
It was established that homogeneous solid solutions of the hexaborides can be produced when, instead of one of the oxides, the charge contains the hexaboride of the given metal. This method can best be employed when one of the oxides exhibits increased volatility.
-
3.
The mechanism of formation of solid solutions of the hexaborides during the simultaneous reduction of oxides is analyzed, and a hypothesis is advanced that the principal accelerating factor is the formation of close contact between the hexaboride particles, resulting from the simultaneous crystallization of the hexaborides on each other. The mobility of the atoms forming during reduction plays a secondary part.
-
4.
It was established that the lattice parameter of solid solutions in the system YB6-LaB6 varies according to a smooth curve with positive deviations from Vegard's rule.
Similar content being viewed by others
Literature cited
J. Lafferty, J. Appl. Phys.,22, 299 (1951).
G.V. Samsonov, V.S. Neshpor, and T.I. Serebryakova, Inzh.-Fiz. Zh.,2, 118 (1959).
J. Lafferty, US Patent No. 2639399 (1953).
G.V. Samsonov, Dopovidi AN UkrRSR, No. 5, 535 (1958).
G.A. Semenov, Zh. Prikl. Khim.,32, 7, 1502 (1959).
A.D. Moshkov and Ya.V. Uspenskii, Production Technology and Applications of Porous Bearings, Mashgiz, Moscow-Sverdlovsk (1959).
A.N. Brodskii, Physical Chemistry, Goskhimizdat (1948), Vol. 1.
V.P. Bondarenko, N.F. Selivanova, and V.Ya. Shlyuko, Vestn. Kievsk. Politekhn. Inst., Ser. Mekhan.-Tekhnol., No. 3 (1966).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 9(45), pp. 43–49, September, 1966.
Rights and permissions
About this article
Cite this article
Bondarenko, V.P., Bilyk, I.I. & Shlyuko, V.Y. Investigation of the conditions of preparation of YB6-LaB6 alloys. Powder Metall Met Ceram 5, 713–717 (1966). https://doi.org/10.1007/BF00774097
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00774097