Literature cited
Yu. M. Lakhtin and Ya. D. Kogan, Nitriding of Steel [in Russian], Mashinostroenie, Moscow (1976).
Yu. M. Lakhtin and P. I. Georgievskii, "Structure and properties of a hardened nitrided layer," Vestn. Inzh. Tekhn., No. 1, 17–21 (1951).
B. Przhenosil, Carbonitriding [in Russian], Mashinostroenie, Moscow (1969).
H. Pakrases, H. Jurgens, and J. Betzold, "Nitrocarburieren zwischen den eutektoiden temperaturen des Fe-N- und Fe-C-system," HTM,38, No. 5, 215–219 (1983).
Yu. M. Lakhtin and Ya. D. Kogan, Structure and Strength of Nitrided Alloys [in Russian], Metallurgiya, Moscow (1982).
Yu. M. Lakhtin, Physical Bases of the Nitriding Process [in Russian], Mashgiz, Moscow (1948).
M. Odsava, "Marstressing of bearing steel," Tokusuko, Special Steel,15, No. 6 (1966).
"New ideas in materials and processing," Metal Progress,86, No. 6 (1964).
S. Levy, K. E. Barness, and J. F. Libsch, "Combining nitriding with induction heating," Metal Progress, No. 6 (1968).
Yu. M. Lakhtin, G. N. Neustroev, and V. N. Botov, "Low-temperature combined carbonitriding of steel with surface-layer hardening," Metalloved. Term. Obrab. Met., No. 10, 8–11 (1974).
Yu. M. Lakhtin, G. N. Neustroev, N. I. Sologubova, and L. P. Frolova, "Carbonitriding at 700°C followed by surface-layer hardening," Metalloved. Term. Obrab. Met., No. 5, 32–36 (1987).
Yu. M. Lakhtin and I. P. Fetisova, "High-temperature nitriding of steels of the austenitic and ferritic-martensitic classes," in: Metal Science and Heat Treatment [in Russian], Mashinostroenie, Moscow (1971).
Additional information
Technical University, Košice, Czechoslovakia. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 25–29, February, 1991.
Rights and permissions
About this article
Cite this article
Lakhtin, Y.M. High-temperature nitriding. Met Sci Heat Treat 33, 124–130 (1991). https://doi.org/10.1007/BF00773888
Issue Date:
DOI: https://doi.org/10.1007/BF00773888