Advertisement

Strength of Materials

, Volume 23, Issue 8, pp 913–919 | Cite as

Method to test tribosystem elements of a material for fatigue

  • G. V. Tsybanev
  • O. N. Belas
Production Section

Abstract

An original method of fatigue testing through application of friction is offered. The changes in specimen bending are recorded during the course of the tests. By means of this methodology we have derived data for a 45-steel contact pair. Analysis of the results indicates the existence of contact stresses optimum for fatigue, at which the fatigue endurance is at its maximum. Unique features in the deformation of the material through resort to this method are discussed.

Keywords

Fatigue Unique Feature Fatigue Testing Contact Stress Original Method 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    G. V. Karpenko,The Effect of Active Liquid Media on Steel Endurance [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1955).Google Scholar
  2. 2.
    V. I. Likhtman, E. D. Shchukin, and P. A. Rebinder,The Physicochemical Mechanics of Metals [in Russian], Izd. Akad. Nauk SSSR, Moscow (1962).Google Scholar
  3. 3.
    E. G. Buglov, M. Ya. Filatov, and É. A. Kolikov, “The resistance of materials under two-frequency loads,”Probl. Prochn., No. 5, 9–17 (1973).Google Scholar
  4. 4.
    T. Yamada and S. Kitagawa, “Investigation of fatigue strength of metals under actual service loads,”Bull. JSME,10, No. 38, 245–252 (1967).Google Scholar
  5. 5.
    B. Ditchek and R. W. Penn, “Random strain amplitude cycling of copper single crystals,”Scr. Met.,13, No. 9, 877–880 (1979).Google Scholar
  6. 6.
    A. Plumtree and J. Lemaitre, “Interaction of damage mechanisms during high-temperature fatigue,” in: Adv. Fract. Res., Preprint 5th Int. Conf. Fract., Cannes,1981, Vol. 5, Oxford (1981), pp. 2379–2384.Google Scholar
  7. 7.
    D. A. Draigor,Wear Resistance and Fatigue Strength in Steel, Depending on Treatment Conditions and the Friction Process [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1959).Google Scholar
  8. 8.
    N. Yahata, T. Hirata, T. Kato, and M. Watanabe, “Effect of sliding friction on the fatigue strength of a medium carbon steel,”Werar.,121, 197–209 (1988).Google Scholar
  9. 9.
    L. A. Sosnovskii, M. A. Makhutov, and Yu. N. Drozdov,Tribofatics: New Ideas Along Promising Lines [in Russian], Belorus. in-t inzh. zh.-d. transp., Gomel' (1990).Google Scholar
  10. 10.
    L. S. Sosnovskii,Tribofatics: Problems and Prospects [in Russian], Belorus. in-t inzh. zh.d. transp., Gomel' (1989).Google Scholar
  11. 11.
    “Calculations and tests for strength in machinery construction. Methods of mechanical testing of metals. Fatigue test methods,” GOST 25.502-79, January 1, 1981.Google Scholar
  12. 12.
    L. F. Coffin and J. F. Tavernelli, “The cyclic straining and fatigue of metals,”Trans. ASME,215, No. 5, 794–807 (1959).Google Scholar
  13. 13.
    V. T. Troshchenko,Metal Fatigue and Inelasticity [in Russian], Naukova Dumka, Kiev (1971).Google Scholar
  14. 14.
    V. T. Troshchenko, Yu. I. Koval', and G. V. Tsybanev, “Investigating the relationship between fatigue endurance of metals and the level of cyclical inelastic strains,”Probl. Prochn., No. 11, 9–13 (1977).Google Scholar
  15. 15.
    G. V. Tsybanev, “Investigating inelastic strains in metals in connection with the development of methods to predict characteristics of fatigue failure resistance,” Dissertation, Candidate of Technical Sciences, Kiev (1977).Google Scholar
  16. 16.
    V. T. Troshchenko, L. A. Khamaza, and G. V. Tsybanev,Methods for the Accelerated Determination of Metal Endurance Limits, Based on Deformation and Energy Criteria [in Russian], Naukova Dumka, Kiev (1979).Google Scholar
  17. 17.
    V. S. Ivanova and V. F. Terent'ev,The Nature of Metal Fatigue [in Russian], Metallurgiya, Moscow (1964).Google Scholar
  18. 18.
    V. T. Troshchenko and V. I. Dragan, “Investigating the quantitative relationships governing inelastic deformation and fatigue failure in metals under torsion,”Probl. Prochn., No. 5, 3–10 (1982).Google Scholar
  19. 19.
    Sasaki Shigemi and Ochi Yasuo, “Some experimental studies of fatigue slip bands persistent slip bands during fatigue process of low-carbon steel,”Eng. Fract. Mech.,12, No. 4, 531–540 (1979).Google Scholar
  20. 20.
    B. J. Lazan, “A study with new equipment of the effects of fatigue stress on the damping capacity and elasticity of mild steel,”Trans. ASM,42, 499–558 (1950).Google Scholar
  21. 21.
    T. A. Lebedev, T. K. Marinets, and A. I. Efremov, “Investigating the cyclical strength of metals by a method of recording fatigue diagrams,” in:Metal Fatigue [in Russian], Izd. Akad. Nauk SSSR, Moscow (1960).Google Scholar
  22. 22.
    Ya. S. Segal, “Investigating the quantitative relationships governing the development of fatigue cracks by a method of recording specimen bending,” in:Fatigue in Metals and Alloys [in Russian], Nauka, Moscow (1971).Google Scholar
  23. 23.
    G. V. Tsybanev and O. N. Belas, “Investigating and predicting the longevity of materials in cyclically loaded tribosystems,” in:Raising the Technical Level, Reliability, and Longevity of Machinery [in Russian], BelNIINTI, Minsk (1990).Google Scholar
  24. 24.
    G. V. Tsybanev, “Estimating the cyclical longevity of specimens with stress concentrators, based on the magnitude of notch flare,”Probl. Prochn., No. 3, 26–30 (1987).Google Scholar
  25. 25.
    G. Neiber,Stress Concentration [Russian translation], Gostekhizdat, Moscow (1964).Google Scholar

Copyright information

© Plenum Publishing Corporation 1992

Authors and Affiliations

  • G. V. Tsybanev
    • 1
  • O. N. Belas
    • 1
  1. 1.Institute of Strength of MaterialsAcademy of Sciences of the Ukrainian SSRKiev

Personalised recommendations