Strength of Materials

, Volume 23, Issue 10, pp 1118–1123 | Cite as

Proof test of ceramic parts for continuous operation

  • M. I. Gorbatsevich
  • A. E. Ginzburg
Scientific-Technical Section
  • 23 Downloads

Abstract

Dependences are constructed for calculating short-time strength and probability of failure of ceramic parts loaded (under different conditions) successively with constant test and operating loads of differing durations. These dependences are based on the concepts that durability of the ceramic is determined by the time of growth in critical defects. Using these dependences, an expression which accounts for depletion in safe life of the ceramic during the proof tests is obtained for the probability of failure of a tested part during operation. It is suggested that the test load for the proof test be determined by minimizing the probability of failure of proof tested ceramic parts.

Keywords

Test Load Continuous Operation Safe Life Operating Load Critical Defect 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. G. Évans and T. G. Léngdon, Structural Ceramics [in Russian], Metallurgiya, Moscow (1980).Google Scholar
  2. 2.
    N. Kamiya, “Life prediction and proof tests of ceramics,” J. Iron Steel Inst. Jpn.,74, No. 12, 2239–2246 (1988).Google Scholar
  3. 3.
    G. A. Gogotsi and V. P. Zavada, “Durability evaluation of ceramics from the parameters of subcritical growth in cracks,” Probl. Prochn., No. 2, 53–56 (1985).Google Scholar
  4. 4.
    G. A. Gogotsi, “Strength of machine-building nitride ceramics,” Strength of Materials Institute of the Academy of Sciences of the Ukraine, Preprint, Kiev (1982).Google Scholar

Copyright information

© Plenum Publishing Corporation 1992

Authors and Affiliations

  • M. I. Gorbatsevich
    • 1
  • A. E. Ginzburg
    • 1
  1. 1.All-Union Scientific Research Institute of Power EngineeringSt. Petersburg

Personalised recommendations