Advertisement

Strength of Materials

, Volume 23, Issue 5, pp 545–551 | Cite as

Fatigue strength of aluminum alloy D16T with programmed loading in air and in a corrosive medium

  • L. A. Sosnovskii
  • A. V. Bogdanovich
Scientific-Technical Section
  • 26 Downloads

Abstract

Regularities are studied for fatigue damage accumulation in aluminum alloy with irregular loading in air and in a corrosive medium. It is shown that satisfactory description of them is possible with consideration of strengthening-weakening processes which are caused by the nature of the material, the form of the loading block, and the effect of the medium.

Keywords

Aluminum Fatigue Aluminum Alloy Fatigue Strength Fatigue Damage 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    V. I. Pokhmurskii, Corrosion-Fatigue Strength of Steels and Methods for Improving It [in Russian], Naukova Dumka, Kiev (1974).Google Scholar
  2. 2.
    G. V. Karpenko, Effect of Medium on the Strength and Endurance of Metals [in Russian], Naukova Dumka, Kiev (1976).Google Scholar
  3. 3.
    N. V. Oleinik, A. N. Magdenko, and S. P. Sklyar, Fatigue Resistance of Materials and Machine Components in Corrosive Media [in Russian], Naukova Dumka, Kiev (1987).Google Scholar
  4. 4.
    A. V. Karlashov and A. D. Gnatyuk, “Effect of some programmed loading factors on the endurance of aluminum alloy under corrosive medium conditions,” Fiz.-Khira. Mekh. Mater., No, 3, 285–290 (1966).Google Scholar
  5. 5.
    M. A. Miner, “Cumulative damage in fatigue,” J. Appl. Mech.,12, No. 3, 159–164 (1945).Google Scholar
  6. 6.
    A. Palmgren, “Die Lebensdauer von Kugulagern,” VDI,68, No. 14, 339–341 (1924).Google Scholar
  7. 7.
    V. P. Kogaev, Strength Analysis with Stresses Which Alternate with Time [in Russian], Mashinostroenie, Moscow (1977).Google Scholar
  8. 8.
    J. Collins, Material Damage in Structures. Analysis, Prediction, Prevention. [Russian translation], Mir, Moscow (1984).Google Scholar
  9. 9.
    H. T. Corten and T. I. Dolan, “Cumulative fatigue damage,” Proc. Int. Conf. Fatigue Met., IME ASME, London (1956).Google Scholar
  10. 10.
    L. A. Sosnovskii, Statistical Mechanics of Fatigue Failure [in Russian], Nauka i Tekhnika, Minsk (1987).Google Scholar
  11. 11.
    V. T. Troshchenko and L. A. Sosnovskii, Fatigue Resistance of Metals and Alloys, Handbook, Vol. 1 [in Russian], Naukova Dumka, Kiev (1987).Google Scholar
  12. 12.
    A. T. Tumanov (editor), Methods for Testing, Monitoring, and Studying Engineering Components: Handbook, in 3 vol., Vol. 2 [in Russian], Mashinostroenie, Moscow (1974).Google Scholar

Copyright information

© Plenum Publishing Corporation 1992

Authors and Affiliations

  • L. A. Sosnovskii
    • 1
  • A. V. Bogdanovich
    • 1
  1. 1.Belorussian Railway Transport Engineering InstituteGomel

Personalised recommendations