Abstract
The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Literature cited
L. Broutman and R. Crock (eds.), Modern Composite Materials [Russian translation], Mir, Moscow (1970).
G. S. Pisarenko (ed.), Strength of Materials and Structural Elements under Extreme Conditions [in Russian], Vol. 2, Naukova Dumka, Kiev (1980).
Yu. M. Tarnopol'skii, I. G. Zhigun, and V. A. Polyakov, Spatially Reinforced Composite Materials: Handbook [in Russian], Mashinostroenie, Moscow (1987).
É. A. Éskin and V. K. Fedchuk, “Effect of temperature on the physicomechanical characteristics of carbon reinforced plastic,” Probl. Prochn., No. 7, 50–53 (1980).
V. K. Fedchuk, V. V. Vengzhen, and É. A. Éskin, “Installation for investigating the mechanical properties of nonmetallic materials under conditions of low and high temperatures and in different media,” Tekh. Organiz. Proizvod., No. 12, 54–56 (1973).
É. A. Éskin and A. S. Petrov, “Change of the physicomechanical properties of glass textolite under repeated thermal loading,” Probl. Prochn., No. 3, 91–94 (1978).
É. A. Éskin, V. K. Fedchuk, and G. P. Khristov, “The effect of the temperature on the structure and strength of carbon reinforced plastics in the range from 293 to 1000 K,” Probl. Prochn., No. 10, 47–50 (1986).
V. G. Makarov, “The effect of porosity on the strength of glass reinforced plastics,” Mekh. Korapozitn. Mater., No. 4, 729–730 (1982).
V. V. Trofimov, N. I. Nikitin, and V. K. Kapralov, “The effect of porous structure on the strength of composite materials based on carbon,” in: Kinetics of Deformation and Failure of Composite Materials. B. I., Leningrad (1983), pp. 185–189.
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.
Rights and permissions
About this article
Cite this article
Éskin, É.A., Petrov, A.S., Fedchuk, V.K. et al. Effect of temperature and cyclic heating on the structure and strength of glass textolite. Strength Mater 23, 665–671 (1991). https://doi.org/10.1007/BF00771235
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00771235