Literature cited
S. V. Serensen, V. P. Kogaev, and R. M. Shneiderovich, Load-Carrying Capacity and Strength Design of Machine Parts [in Russian], Mashinostroenie, Moscow (1975).
I. A. Birger, B. F. Shorr, I. V. Dem'yanushko, et al., Creep Resistance of Machine Parts [in Russian], Mashinostroenir, Moscow (1975).
I. A. Oding, Tolerable Stresses in Machine Building and the Fatigue Strength of Metals [in Russian], Mashinostroenie, Moscow (1962).
R. B. Kheivud, Designing with Allowance for Fatigue [in Russian], Mashinostroenie, Moscow (1969).
A. J. Kennedy, Processes of Creep and Fatigue in Metals, Wiley (1963).
A. M. Freudenthal, “Aspects of fatigue damage accumulation at elevated temperatures,” Acta Metall.,11, No. 1, 753–758 (1963).
T. P. Zakharova, “Fatigue tests at high temperatures,” in: Methods of Testing, Inspecting, and Investigating Machine-Building Materials [in Russian], Vol. 2, Mashinostroenie, Moscow (1974), pp. 134–142.
I. I. Ishchenko, B. N. Sinaiskii, V. P. Golub, and A. D. Pogrebnyak, “On the effect of a static load on the fatigue strength of heat-resistant nickel alloys in a broad temperature range,” in: Strength, Reliability, and Endurance of Aircraft Structures [in Russian], KIIGA, Kiev (1976), pp. 56–60.
I. I. Ishchenko and V. P. Golub, “On evaluating the cyclic creep of heat-resistant nickel alloys,” Prikl, Mekh.,13, No. 5, 59–66 (1977).
I. I. Ishchenko, B. N. Sinaiskii, V. P. Golub, et al., “On certain features of change in the fatigue resistance of heat-resistant nickel alloys under the combined influence of variable and static loads,” Probl. Prochn., No. 11, 15–21 (1977).
F. Garofalo, Fundamentals of Creep and Creep-Rupture in Metals, Macmillan (1965).
Yu. N. Rabotnov, Creep of Structural Elements [in Russian], Nauka, Moscow (1966).
C. Sims and V. Hagel, Heat-Resistant Alloys [Russian translation], Metallurgiya, Moscow (1976).
G. S. Pisarenko and A. A. Lebedev, Deformation and Strength of Materials in a Complex Stress State [in Russian], Naukova Dumka, Kiev (1976).
S. V. Serensen, “On criteria of the resistance of materials for nonsteady loading at elevated temperatures,” in: Creep Resistance of Materials and Structural Elements [in Russian], Naukova Dumka, Kiev (1967), pp. 315–321.
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 12, pp. 13–18, December, 1979.
Rights and permissions
About this article
Cite this article
Ishchenko, I.I., Golub, V.P., Sinaiskii, B.N. et al. Method of evaluating and predicting the limiting state of heat-resistant alloys under asymmetric high-cycle loading. Strength Mater 11, 1355–1360 (1979). https://doi.org/10.1007/BF00770554
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00770554