Distribution of texture across the thickness of rolled sheet of VT19 alloy
- 30 Downloads
In 10-mm-thick rolled sheets of VT19 alloy at a distance of 0.5 mm from the surface the maximum in (110) shear texture and the minimum in (100)+(112)+(111) deformation texture are observed.
While not significantly changing the character of distribution of the texture across the sheet thickness, annealing of rolled sheet at 880°C does cause a significant increase in the volume of material without clear crystallographic orientations (texture-free fraction) and promotes the formation of a weakly expressed recrystallization texture.
KeywordsRecrystallization Crystallographic Orientation Sheet Thickness Rolled Sheet Recrystallization Texture
Unable to display preview. Download preview PDF.
- 1.A. I. Khorev, A. I. Krasnozhon, L. G. Mukhina, and T. F. Mozgunova, “Thermomechanically hardened VT19 titanium alloy with σt≥ 165 kg/mm2,“, in: Alloying and Heat Treatment of Titanium Alloys [in Russian], Otd. Nauch.-Tekh. Inf., Moscow (1977), pp. 286–290.Google Scholar
- 2.N. V. Ageev, A. A. Babaréko, and S. Ya. Betsofen, “The description of texture by the method of reverse pole figures”, Izv. Akad. Nauk SSSR, Met., No. 1, 94 (1974).Google Scholar
- 3.S. V. Pashenko, V. Ya. Gol'dshtein, A. P. Seryi, and S. N. Grazhdankin, “Texture formation in hot rolling of a silicon alloy”, Fiz. Met. Metalloved.,58, No. 1, 63–68 (1984).Google Scholar
- 4.V. K. Vorontsov, R. É. Gafarov, and V. V. Lashin, “Experimental investigation of the degree of shear deformation across the thickness of rolled sheet”, Izv. Vyssh. Uchebn. Zaved., Chern. Met., No. 3, 59–62 (1985).Google Scholar