Strength of Materials

, Volume 22, Issue 3, pp 390–396 | Cite as

Some characteristic features of the method of slip lines (as applies to biaxial-loading problems)

  • V. V. Erofeev
  • A. A. Raspopov
  • M. V. Shakhmatov
Scientific and Technical Section


Graphoanalytic principals for the construction of slip-line nets are developed, and basic relationships of the slip-line method for the case of biaxial loading are obtained on the basis of analysis of the stressed state and bearing capacity of an H-S-H joint in a shell structure.


Stressed State Characteristic Feature Shell Structure Slip Line Biaxial Loading 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. D. Tomlenov, Theory of Plastic Deformation of Metals [in Russian], Metallurgiya, Moscow (1972).Google Scholar
  2. 2.
    E. P. Unksov, “Once again on the plane settlement of a strip between parallel noiseproof plates,” Kuzn. Shtampovoch. Proiz., No. 5, 18–20 (1980).Google Scholar
  3. 3.
    O. A. Bakshi, V. V. Erofeev, M. V. Shakhmatov, et al., “On the effect of degree of mechanical inhomogeneity on the static strength of welded joints,” Svaroch. Promiz., No. 4, 1–4 (1983).Google Scholar
  4. 4.
    M. V. Shakhmatov, V. V. Erofeev, and A. A. Ostsemin, “On some characteristic features of the method of slip lines in solving axisymmetric problems of the theory of plasticity,” Probl. Prochn., No. 3, 88–94 (1985).Google Scholar
  5. 5.
    V. G. Kovalev, “Stresses, slip lines, and characteristics of the plane stressed state,” in: Machines and Procedure for the Pressure Treatment of Metals [in Russian], Mashinostroenie, Moscow (1967), pp. 153–166.Google Scholar
  6. 6.
    A. A. Ostrovskii, “Direction of local yield layers in a complex stressed state,” Prikl. Mekh.,10, No. 2, 112–115 (1974).Google Scholar
  7. 7.
    M. A. Netrebskii, “On the strength of circular joints in high-pressure vessels,” in: Multilayer Welded Structures and Pipes [in Russian], Naukova Dumka, Kiev (1984), pp. 354–359.Google Scholar
  8. 8.
    O. A. Pakshi and A. S. Bogomolova, “Strength of mechanically inhomogeneous welded joints in biaxial tension,” Svaroch. Proiz., No. 5, 3–6 (1971).Google Scholar
  9. 9.
    Yu. N. Rabotnov, Mechanics of a Deformed Solid [in Russian], Nauka, Moscow (1979).Google Scholar
  10. 10.
    M. M. Filonenko-Borodich, Mechanical Theories of Strength [in Russian], Izdat. Mosk. Univ., Moscow (1961).Google Scholar
  11. 11.
    L. M. Kachanov, Fundamentals of Plasticity Theory [in Russian], Nauka, Moscow (1969).Google Scholar
  12. 12.
    L. Prandtl, “Examples of the application of Hencky's theorem to equilibrium of plastic bodies,” in: Theory of Plasticity [Russian translation], Yu. N. Rabotnov (ed.), Gostekhizdat, Moscow (1948), pp. 102–113.Google Scholar
  13. 13.
    V. V. Erofeev and A. A. Raspopov, “The bearing capacity of mechanically inhomogeneous welded butt joints under uniaxial loading,” in: Problems of Welding Production [in Russian], Chelyabinsk. Politekh. Instit., Chelyabinsk (1987), pp. 31–36.Google Scholar
  14. 14.
    A. N. Monoshkov, S. I. Pykhov, and I. A. Pustin, “Plastic stability and its role in the assessment of pipe strength,” in: Production of Coated Pipes and Their Finishing and Quality Control [in Russian], Metallurgiya, Moscow (1972), pp. 77–81.Google Scholar

Copyright information

© Plenum Publishing Corporation 1990

Authors and Affiliations

  • V. V. Erofeev
    • 1
  • A. A. Raspopov
    • 1
  • M. V. Shakhmatov
    • 1
  1. 1.Lenin Young Communist League Chelyabinsk Polytechnic InstituteUSSR

Personalised recommendations