Abstract
The results are presented of a calculation-experimental investigation of the thermal, stressed and strained, and limiting conditions of 5KhNM and 5Kh2MNAF steel punches used in hot forming processes. Data of variations of calculation for pure force and thermal action and also for the case of combined and thermomechanical loading is analyzed. The increase in the operating parameters for punches of nitrided 5Kh2MNFA steel is substantiated.
Similar content being viewed by others
Literature cited
Yu. M. Skrynchenko and L. A. Poznyak, The Capacity for Operation and Properties of Tool Steels [in Russian], Naukova Dumka, Kiev (1979).
M. A. Tylkin, Punches for Hot Working of Metals [in Russian], Vysshaya Shkola, Moscow (1977).
Tz. Dzhonov, Z. Sankev, and N. Georgiev, “Notes on the temperature conditions on a punch in the production cycle,” in: Papers of a Scientific Conference [in Bulgarian], Vyssh. Mash.-Élektrotekh. Inst., Gabrovo (1986).
Open- and Closed-Die Forging of Steel: A Handhook [in Russian], Vol. 2, Mashinostroenie, Moscow (1968).
A. S. Tsybenko, N. G. Krishchuk, A. A. Vachev, and V. P. Todorov, The “Thermoelasto-plasticity” Package of Applied Programs for Simulation of the Nonsteady Thermal and Non-isothemal Thermoelastoplastic Stressed and Strained Conditions of Plane and Axially Symmetric Bodies [in Russian], Vyssh. Mash.-Elektrotekh. Inst., Gabrovo (1985).
A. S. Tsybenko, N. G. Vashchenko, N. G. Krishuk, and Yu. O. Lavendel, An Automated System of Performing Finite Element Calculations [in Russian], Vishcha Shkola, Kiev (1986).
A. S. Tsybenko, N. G. Vashchenko, N. G. Krishchuk, and V. V. Palenyi, Algorithms and Programs for Calculation of Two-Dimensional Thermal Fields by the Finite Element Method: A Handbook [in Russian], Kiev. Politekh. Inst., Kiev (1986).
N. G. Kozhevnikov and L. A. Novitskii, The Thermophysical Properties of Materials: A Handbook [in Russian], Mashinostroenie, Moscow (1982).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 6, pp. 60–64, June, 1990.
Rights and permissions
About this article
Cite this article
Tsybenko, A.S., Krishchuk, N.G. & Georgiev, N. Mathematical simulation of the thermomechanical condition of a punch in hot forming processes. Strength Mater 22, 849–854 (1990). https://doi.org/10.1007/BF00767445
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00767445