Abstract
A machine with high metrological characteristics for testing composite materials and also foils, strips, wire, fibers, and grids in heating equipped with a system for processing of experimental data based on an information and measuring computer unit is described. The chamber of the machine in the form of a cube with intersecting holes makes it possible to increase its design along the axes. The method given for fastening the current leads makes it possible to place the heater in any position of the center portion of the chamber.
Similar content being viewed by others
Literature cited
V. V. Klyuev (ed.), Testing Technology: A Handbook, in 2 Vols. [in Russian], Vol. 2, Mashinostroenie, Moscow (1982).
M. M. Aleksyuk, V. A. Borisenko, and V. P. Krashchenko, Mechanical Tests of Materials at High Temperatures [in Russian], Naukova Dumka, Kiev (1980).
V. P. Krashchenko, Yu. P. Lastovets, and N. P. Rudnitskii, “A machine for studying the mechanical properties of materials in a broad range of temperatures and strain rates”, Probl. Prochn., No. 2, 112–114 (1987).
V. P. Krashchenko and A. I. Gurarii, “A machine for tensile testing of ring specimens in the 290–2000 K temperature range”, Probl. Prochn., No. 8, 117–119 (1986).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 10, pp. 110–112, October, 1990.
Rights and permissions
About this article
Cite this article
Krashchenko, V.P., Rudnitskii, N.P. A machine for determination of the mechanical properties of refractory materials. Strength Mater 22, 1541–1544 (1990). https://doi.org/10.1007/BF00767245
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00767245