Metal Science and Heat Treatment

, Volume 29, Issue 8, pp 573–578 | Cite as

Induction heat treatment as a means of increasing production

  • G. F. Golovin
  • A. N. Shamov
Technology of Heat Treatment Using Induction Heating
  • 29 Downloads

Keywords

Heat Treatment Induction Heat Induction Heat Treatment 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. F. Zolotarskii (ed.), Termally Hardened Rails [in Russian], Transport, Moscow (1976).Google Scholar
  2. 2.
    G. F. Golovin and V. I. Smirnov, "Hardening crankshaft journals by forming a hardened layer on the hollow chamfer," Proceedings of the Scientific-Research Institute of High-Frequency Currents, and the Central Office of Technical Information of the Leningrad National Economy Council, No. 1-2 (1960).Google Scholar
  3. 3.
    V. P. Suchkousov, V. I. Verkhalo, and K. V. Aleshina, Automated Apparatus for Hardening the Shafts of Fractional-Horsepower Electric Motors [in Russian], Élektrotekhnika, Moscow (1984).Google Scholar
  4. 4.
    I. N. Kidin and E. V. Astaf'eva, "Radiographic investigation of the nonuniformity of martensite produced by hardening steel with induction heating," in: Commercial Use of High-Frequency Currents [in Russian], Book 46, LONITOMashprom, Riga (1957).Google Scholar
  5. 5.
    K. Z. Shepelyakovskii, Strengthening Machine Components by Surface Hardening with Induction Heating [in Russian], Mashinostroenie, Moscow (1972).Google Scholar
  6. 6.
    G. A. Khasin, A. I. Dianov, T. N. Popova, et al., Electrothermal Treatment and Hot Drawing of Steel [in Russian], Metallurgiya, Moscow (1984).Google Scholar

Copyright information

© Plenum Publishing Corporation 1988

Authors and Affiliations

  • G. F. Golovin
  • A. N. Shamov

There are no affiliations available

Personalised recommendations