Abstract
The article reports comprehensive primary experimental information on cleavage in composite specimens, armco iron plates, loaded by two consecutive impacts of a flat striker. This information consists of results of macrokinetic studies of the cleavage process in the form of stress profiles on the boundary of the specimen with a “soft” obstacle and the results of studies on cleavage microdamage that formed in the same experiments in which the stress history was recorded during cleavage. The distribution of the specific surface of microcracks inside saved solid and composite specimens has been determined. A qualitative picture of the evolution of the cleavage fracture of armco iron under a complicated one-dimensional load has been obtained on the basis of the results of macrokinetic measurements and data from microstructural observations of cleavage damage.
Similar content being viewed by others
References
A. M. Molodets, V. I. Lebedev, and A. N. Dremin, “Microstructural laws of cleavage fracture of iron,” Fiz. Gor. Vzryva,25, No. 4, 101 (1989).
G. V. Stepanov, Elastoplastic Deformation of Materials by Pulsed Loads [in Russian], Naukova Dumka, Kiev (1979).
G. I. Kanel', A. M. Molodets, and A. N. Dremin, “Change in the strength properties of metals in shock waves,” Fiz. Met. Metalloved.,46, No. 1, 200 (1978).
A. M. Molodets, A. V. Orlov, and A. N. Dremin, “Effect of the temperature on the relaxation of the dynamic elastic limit of glass,” Proceedings of Ninth All-Union Symposium on Combustion and Explosion. Detonation [in Russian], Chernogolovka (1989).
A. M. Molodets, “Duration of cleavage fracture process,” Dinamika Sploshnoi Sredy, Zb. Nauch. Tr. Akad. Nauk SSSR. Sib. Otd. Inst. Gidrodinamiki, No. 48, 111 (1980).
I. P. Kudryavtsev, Textures in Metals and Alloys [in Russian], Metallurgiya, Moscow (1976).
S. A. Saltykov, Stereometric Metallurgy [in Russian], Metallurgiya, Moscow (1976).
A. M. Molodets and A. N. Dremin, “Two stages in the process of splitting fracture,” Dokl. Akad. Nauk SSSR,249, No. 6, 1361 (1979).
Additional information
Institute of Technical Physics, Russian Academy of Sciences, 142432 Chernogolovka. Translated from Fizika Goreniya i Vzyrva, Vol. 31, No. 3, pp. 63–71, May–June, 1995.
Rights and permissions
About this article
Cite this article
Eremchenko, E.N., Yakusheva, T.I. & Molodets, A.M. Cleavage fracture of armco iron under a complicated one-dimensional load. Combust Explos Shock Waves 31, 327–333 (1995). https://doi.org/10.1007/BF00742678
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00742678