References
F. F. LANGE,J. Mater. Sci. 17 (1982) 225.
Idem, ibid.17 (1982) 240.
T. K. GUPTA, F. F. LANGE and J. H. BECHTOLD, ibid.13 (1978) 1464.
R. C. GARVIE and M. V. SWAIN, ibid.20 (1985) 1193.
R. H. J. HANNINK,Mater. Forum 11 (1988) 43.
T. W. COYLE, R. P. INGEL and P. A. WILLGING, in “Advanced structural ceramics”, MRS Symposia Proceedings, Vol. 78, edited by P. F. Becher, M. V. Swain and S. Somiya (Materials Research Society, Pittsburgh, Pennsylvania, 1987) p. 89.
E. DOW WHITNEY and P. N. VAIDYANATHAN, in “Tool materials for high speed machining”, edited by J. A. Swartley-Loush (American Society for Metals International, Metals Park, Ohio, 1987) p. 77.
J. WANG and R. STEVENS,J. Mater. Sci. 24 (1989) 3421.
A. G. EVANS and E. A. CHARLES,J. Amer. Ceram. Soc. 59 (1976) 371.
L. M. ARUNACHALAM, PhD synopsis, IIT Madras, India (1990).
L. M. ARUNACHALAM, C. V. GOKULARATHNAM and R. C. BUCHANAN,Trans. Indian Inst. Metals 40 (1987) 521.
M. V. SWAIN and R. H. J. HANNINK,J. Amer. Ceram. Soc. 72 (1989) 1358.
G. L. KEHL, in “The principles of metallographic laboratory practice” (McGraw-Hill, New York, 1949) p. 32.
V. E. ANNAMALAI, B. L. ANANTHARAMU, C. V. GOKULARATHNAM and R. KRISHNAMURTHY,J. Mater. Sci. Lett. accepted.
E. RYSKEWITCH, in “Oxide ceramics — physical chemistry and technology” (Academic Press) p. 375.
E. C. SUBBARAO, H. S. MAITI and K. K. SRIVATSAVA,Phys. Status Solidi (a) 21 (9) (1974) 9.
L. L. FEHRENBACHER and L. A. JACOBSON,J. Amer. Ceram. Soc. 48 (1965) 157.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Annamalai, V.E., Anantharamu, B.L.A., Gokularathnam, C.V. et al. Transformation behaviour of yttria tetragonal zirconia polycrystals in a metal-cutting environment. J Mater Sci Lett 10, 1374–1376 (1991). https://doi.org/10.1007/BF00735682
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00735682