Literature cited
G. Aizel't, in: Research on Tribomachinery [in Russian], NIIMASh, Moscow (1975), p. 101.
C. J. Boner, Gear and Transmission Lubricants, Reinhold, New York (1964) [Russian translation, pp. 359, 503, 335, 486].
A. S. Terekhov, P. P. Zaskal'ko, et al., Avtomob. Prom., No. 6 (1976).
A. V. Chichinadze, G. A. Golubev, et al., in: Wear Resistance [in Russian], Nauka, Moscow (1975), p. 36.
R. V. Brink, “The heat load of an oil seal,” Proceedings of the Sixth International Conference of Fluid Seals, Munich (1973), publ. Granfield (1973), C1/1–C1/10.
F. Schurle and G. Upper, Automob. Ind.,20, No. 1, 59–62, 67–70 (1975).
ASTM Special Publ. No. 334 (1963), pp. 216–237.
T. G. Griffen, Paper from SAE meeting, Atlantic City, N. J., June 1962.
E. A. Schmid, Antribstechnik,13, No. 8, 465–467, 447, 448 (1974).
FAG Ball Bearings and FAG Roller Bearings, Catalogs 4100R and A of firm Kugel Fischer Georg Schaefer, Schweinfurt, West Germany (1971), p. 15.
E. A. Spitsin, B. A. Yakhin, et al., Design and Selection of Rolling-Contact Bearings — A Handbook [in Russian], Mashinostroenie, Moscow (1974), pp. 18, 19.
F. Neumann, Ropa Uhlie, No. 10, 586–587 (1975).
A. I. Petrusevich, in handbook: Machine Elements [in Russian] (ed. by N. S. Acherkan), Mashinostroenie, Moscow (1969), p. 141.
A. S. Terekhov, A. A. Baibakova, et al., Vestn. Mashinostr., No. 3 (1976).
F. Niemann and G. Lechner, Erdoel Khole,20, No. 2 (1967).
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 4, pp. 48–50, April, 1977.
Rights and permissions
About this article
Cite this article
Zaskal'ko, P.P., Terekhov, A.S., Nekrasov, V.I. et al. Effect of temperature on operability of lubricating oil in reduction gears. Chem Technol Fuels Oils 13, 282–285 (1977). https://doi.org/10.1007/BF00729721
Issue Date:
DOI: https://doi.org/10.1007/BF00729721