Advertisement

Chemistry and Technology of Fuels and Oils

, Volume 3, Issue 2, pp 132–136 | Cite as

Oil filtration in automotive engines

  • M. A. Grigor'ev
Petroleum Refinery Equipment
  • 30 Downloads

Conclusions

  1. 1.

    The efficiency of oil cleaning in automotive engines to remove contaminants depends both on the type of cleaner and on the dispersancy of the oil.

     
  2. 2.

    With low-dispersancy oils, the use of a centrifuge results in a greater amount of contaminants in the oil than does the use of fine filters; with high-dispersancy (additive) oils, the reverse is true.

     
  3. 3.

    Prolonged efficient operation of a full-flow fine filter is possible only when using oils with dispersant additives.

     
  4. 4.

    The reduction in operating efficiency of DASFO filters on additive oils is caused by the rapid plugging of the cartridge filter elements.

     

Keywords

Centrifuge Filtration Operating Efficiency Efficient Operation Filter Element 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. V. Adamovich, Characteristics of Fine Oil Filters [in Russian], Mashgiz (1952).Google Scholar
  2. 2.
    M. A. Grigor'ev and G. P. Pokrovskii, Automotive and Tractor Centrifuges [in Russian] (1960).Google Scholar
  3. 3.
    C. E. Watson, K. T, Hanly, and R. W. Burchel, Abrasive Wear of Piston Rings, SAE, No. 11–14/1 (1955) (Preprint).Google Scholar

Copyright information

© Consultants Bureau 1967

Authors and Affiliations

  • M. A. Grigor'ev
    • 1
  1. 1.NAMI (Central Scientific-Research Automotive and Automotive-Engine Institute)USSR

Personalised recommendations