References
H. JONES and C. SURYANARAYANA,J. Mater. Sci. 8 (1973) 705.
H. E. CLINE and J. D. LIVINGSTON,Trans. Met. Soc. AIME 245 (1969) 1987.
J. D. LIVINGSTON, H. E. CLINE, E. F. KOCH and R. R. RUSSELL,Acta metall. 18 (1970) 399.
M. H. BURDEN and H. JONES,J. Inst. Metals 98 (1970) 249.
I. R. HUGHES and H. JONES,J. Mater. Sci. 11 (1976) 1781.
J. A. JUAREZ-ISLAS and H. JONES,Acta Metall. 35 (1987) 499.
W. J. BOETTINGER, in “Rapidly quenched metals”, edited by T. Masumoto and R. Suzuki, Vol. 1 (The Japan Institute of Metals, Sendai, 1982) p. 85.
W. J. BOETTINGER, D. SHECHTMAN, R. J. SCHAEFER and F. S. BIANCANIELLO,Met. Trans. 15A (1984) 55.
M. RAPPAZ, M. GREMAUD, R. DEKUMBIS and W. KURZ, in “Laser treatment of materials”, edited by B. L. Mordike (DGM, Oberursel, 1987) p. 43.
M. RAPPAZ, B. CARRUPT, M. ZIMMERMANN and W. KURZ,Helv. Phys. Acta 60 (1987) 924.
M. ZIMMERMANN, M. CARRARD and W. KURZ,Acta Metall. 37 (1989) 3305.
M. GREMAUD, M. CARRARD and W. KURZ,ibid. 38 (1990) 25.87.
J. JUAREZ-ISLAS, H. JONES and W. KURZ,Mater. Sci. Engng 98 (1988) 201.
G. A. CHADWICK,J. Inst. Metals 92 (1963) 18.
D. J. S. COOKSEY, D. MUNSON, M. P. WILKINSON and A. HELLAWELL,Phil Mag. 10 (1964) 745.
M. IBARAKI and T. OKAMOTO,Nippon Kinzoku Gakkai-Si 31 (1967) 1290.
A. MOORE and R. ELLIOT, in “The solidification of metals (Iron and Steel Institute, London, 1968) p. 167.
J. N. CLARK and R. ELLIOTT,Met. Trans. 7A (1976) 1197.
M. ZIMMERMANN, Unpublished work (1990).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Moir, S.A., Jones, H. On the efficacy of tungsten-intert gas weld traversing as a front velocity controlled rapid solidification technique. J Mater Sci Lett 10, 1199–1201 (1991). https://doi.org/10.1007/BF00727904
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00727904