This is a preview of subscription content, log in via an institution to check access.
References
N. Claussen, M. Rühle, and A. H. Heuer, “Science and technology of zirconia II,” in: Advance in Ceramics, Vol. 12 (1984), p. 325.
R. H. J. Hannink and M. V. Swain, “Particle toughening in partially stabilized zirconia,” in: Tailor. Multiphase and Compos. Ceram. (1986), pp. 259–279.
R. C. Garvie, R. H. Hannink, and R. T. Pascoe, “Ceramic steel?” Nature,285, 703 (1975).
T. Sacuma, Y. Yoshizava, and H. Suto, “The modulated structure formed by isothermal aging in ZrO2-5.2 mol.% Y2O3,“ J. Mat. Science,20, 1085–1092.
T. Masaki, “Mechanical properties of Y-PSZ after aging at low temperature,” Int. J. High Tech. Ceram.,2, 85–98 (1986).
K. Kobajashi, M. Kuwajima, and T. Masaki, “Phase change and mechanical properties of ZrO2-Y2O3 solid electrolyte after aging,” Sol. State Ionics, Nos. 3–4, 489–493 (1983).
M. Ishitsuka, T. Sato, T. Endo, et al., “Grain-size dependnece of thermal crack resistance of yttrium-doped tetragonal zirconia polycrystals,” J. Am. Ceram. Soc.,37, No. 8, 638–640 (1990).
T. Masaki, “Mechanical properties of toughened ZrO2-Y2O2 ceramics,” J. Am. Ceram. Soc.,69, No. 8, 2523–2525 (1981).
A. G. Evans, A. H. Heuer, and D. L. Porter, “The fracture toughness of ceramics,” in: Fracture, Vol. 1, ICF-4, Waterloo (1977), pp. 539–556.
F. F. Lange, “Transformation toughening,” J. Mater. Sci.,17, 225–262 (1982).
W. Wunderlich and M. Rühle, “Critical tensile stress for microcracking in monoclinic zirconia,” in: High Tech. Ceram.: Proc. World Congr. 6 Int. Meet. Mod. Ceram. Tech., Vol. B, Milan (1986–1987), pp. 1219–1224.
S. P. S. Badval, F. T. Ciacchi, M. V. Swain, and V. Zelizko, “Creep deformation and the grain-boundary resistivity of tetragonal zirconia polycrystalline materials,” J. Am. Ceram. Soc.,73, No. 8, 2405–2407 (1990).
R. W. Rice, S. M. Freiman, and P. F. Becher, “Grain-size dependence of fracture energy in ceramics,” J. Am. Ceram. Soc.,64, No. 6, 345–354 (1981).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, No. 6, pp. 46–50, November–December, 1992.
Rights and permissions
About this article
Cite this article
Vasil'ev, A.D., Ivashchenko, O.M., Peichev, V.G. et al. Failure mechanisms and strength of zirconia partially stabilized with yttrium oxide. Mater Sci 28, 511–515 (1992). https://doi.org/10.1007/BF00724461
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00724461