Design strength of VT22 titanium alloy in different structural conditions

  • V. V. Shevel'kov
  • L. F. Kratovich


Titanium Titanium Alloy Structural Condition Design Strength VT22 Titanium 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    B. A. Drozdovskii, L. V. Prokhodtseva, and N. I. Novosil'tseva, The Crack Resistance of Titanium Alloys [in Russian], Metallurgiya, Moscow (1983).Google Scholar
  2. 2.
    L. F. Kratovich and A. M. Pochuev, “A machine for cyclic tests,” Zavod. Lab., No. 2, 88–89 (1986).Google Scholar
  3. 3.
    L. F. Kratovich, “A method of evaluation of crack resistance in cyclic loading,” ibid., No. 4, 102–105 (1988).Google Scholar
  4. 4.
    RD50-345-82. Method Instructions. Calculations and Tests for Strength. Methods of Mechanical Tests of Metals. Determination of the Characteristics of Crack Resistance (Fracture Toughness) in Cyclic Loading [in Russian], Standartov, Moscow (1983).Google Scholar
  5. 5.
    V. N. Moiseev, Yu. I. Zakharov, and E. V. Znamenskaya, “Prospects for development of high-strength titanium alloys,” Titanium. Metallurgy and Technology: Proceedings of the Third International Conference on Titanium [in Russian], Vsesoyuz. Inst. Leg. Splavov, Moscow (1978), pp. 285–291.Google Scholar
  6. 6.
    V. N. Barsukov and V. V. Shevel'kov, “Features of decomposition ofβ-solid solution in VT22 high-strength titanium alloy,” Optimization of the Structure and Properties of Steels and Alloys in Light of Realization of the “Intensification-90” Program [in Russian], Leningrad. Dom Nauch. Tekh. Prop., Leningrad (1987), pp. 74–77.Google Scholar
  7. 7.
    V. V. Ostashev and V. V. Shevel'kov, “Features of the structure of VT22 alloy after thermocycling treatment,” Problems of Resource-Saving Technologies and Production Operations [in Russian], PFLPI, Pskov (1985).Google Scholar
  8. 8.
    A. M. Parshin, V. N. Barsukov, and V. V. Shevel'kov, “The influence of thermocycling treatment on increasing the plasticity and toughness of coarse-grained semifinished products of VT22 titanium alloy,” Increasing the Quality, Reliability, and Life of Parts of Constructional, Heat-Resistant, Powder, and Tool Steels and Alloys [in Russian], Leningrad. Dom Nauch. Tekh. Prop., Leningrad (1986), pp. 33–37.Google Scholar
  9. 9.
    V. S. Lyasotskaya, N. Yu. Ravdonikas, and I. A. Lebedev, “Features of thermocycling treatment of titanium alloys,” Metalloved. Term. Obrab. Met., No. 12, 41–45 (1985).Google Scholar
  10. 10.
    S. G. Glazunov and B. A. Kolachev (eds.), The Metallography of Titanium Alloys [in Russian], Metallurgiya, Moscow (1980).Google Scholar

Copyright information

© Plenum Publishing Corporation 1991

Authors and Affiliations

  • V. V. Shevel'kov
    • 1
  • L. F. Kratovich
    • 1
  1. 1.Plant of Higher Technical School at Leningrad Metallurgical Plant POTPskov

Personalised recommendations