Literature cited
Method Instructions. Calculations and Tests for Strength in Machine Building. Methods of Mechanical Testing of Metals. Determination of the Characteristics of Resistance to Crack Development (Crack Resistance) in Cyclic Loading, Izd. Vsesoyuz. Nauch.-Issled. Inst. Norm. Mashinostr., Gos. Kom. Standart. Sov. Min. SSSR, Fiz.-Mekh. Inst. Akad. Nauk Ukr. SSR, L'vov (1979).
S. Ya. Yarema and L. V. Ratych, “Clamps for fastening flat samples in tension by concentrated forces,” Zavod. Lab., No. 4, 500–501 (1975).
S. Ya. Yarema and A. I. Zboromirskii, “The influence of the method of applying a concentrated force on the stressed condition at a crack tip in a plate,” Fiz.-Khim. Mekh. Mater., No. 1, 61–69 (1973).
S. Ya. Yarema, “The stressed condition of disks with cracks recommended as samples for investigating the resistance of materials,” Fiz.-Khim. Mekh. Mater., No. 4, 25–39 (1976).
M. P. Savruk, Two-Dimensional Problems of Elasticity for Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1981).
M. P. Savruk, “Plane problems of the theory of elasticity for a multibond area with holes and cracks,” Fiz.-Khim. Mekh. Mater., No. 5, 51–56 (1980).
N. I. Muskhelishvili, Some Fundamental Problems of the Mathematical Theory of Elasticity [in Russian], Nauka, Moscow (1966).
S. Ya. Yarema, “Analysis of cracked disk specimens,” Eng. Fract. Mech.,12, No. 3, 365–375 (1979).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 18, No. 2, pp. 74–81, March–April, 1982.
Rights and permissions
About this article
Cite this article
Yarema, S.Y., Savruk, M.P. & Zboromirskii, A.I. Influence of loading device design on the stress intensity factor in a disk sample. Mater Sci 18, 160–166 (1982). https://doi.org/10.1007/BF00723349
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00723349