Literature cited
S. V. Boyarshinov, Fundamentals of Engineering Mechanics of Machines [in Russian], Mashinostroenie, Moscow (1973).
L. N. Sokolov and V. N. Efimov, “Examination of hardening-softening of steels and alloys,” Izv. Akad. Nauk SSSR, Met., No. 3, 145–149 (1982).
P. I. Polukhin, G. Ya. Gun, and A. M. Galkin, Plastic Deformation Resistance of Metals of Alloys (Handbook) [in Russian], Metallurgiya, Moscow (1983).
L. N. Sokolov, V. N. Efimov, V. V. Savitskii, et al., “Development of the conditions of cyclic hot deformation of axisymmetric forgings of titanium alloys,” Kuzn. Shtamp. Proizvod., No. 8, 13–14 (1987).
Ya: S. Shvartsbart, G. S. Nikitin, and I. G. Zuev, “Effect of the multistep deformation regime on the hot deformation resistance of corrosion-resisting steels,” Izv. Akad. Nauk SSSR, Met., No. 2, 155–164 (1978).
S. V. Frolov and R. Ya. Shostak, Electricity in Higher Mathematics [in Russian]. in 2 Vols., Vysshaya Shkola, Moscow (1973).
N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1975).
V. L. Kolmogorov, Mechanics of Pressure Working Metals [in Russian], Metallurgiya, Moscow (1986).
S. S. Salyja, P. C. Pandey, and S. Dalela, “A simple method for flow stress deformation under metal-working conditions,” in: SME Manuf. Eng. Trans.: 9th North Am. Manuf. Res. Proc. (1981), pp. 19–22.
H. Malinovsky and J. Sinszak, “Crack formation in the process of ingot forging,” Zesz. Nauk AGH. Met. Odlew,8, No. 2, 333–346 (1982).
N. F. Anoshikin, V. K. Kataya, and G. K. Kataya, “Localization of deformation in hot working in titanium alloys,” Kuzn. Shtamp. Proizvod., No. 8, 25–27 (1983).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 27, No. 4, pp. 112–118, July–August, 1991.
Rights and permissions
About this article
Cite this article
Zhadkevich, M.L., Efimov, V.N., Perebeinos, A.S. et al. Using upsetting blanks of the dished end type with subsequent final stamping for increasing the quality of semifinished products. Mater Sci 27, 434–441 (1992). https://doi.org/10.1007/BF00723241
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00723241